Hello! Oscar Curero wrote: > I have a pundit-r with a hauppauge pvr-350 using suse 9.3 (kernel > 2.6.11.4-20a). > I installed the drivers using the rpm which came with the cd and loaded the > original firmware from the windows cd. Until then I didn't have any problem, > but know I can't tune the pvr. All I get is noise and from time to time a very > weak signal on some channels. This is the output from dmesg: > > [...] > tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 2932857 > tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) > tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > tveeprom: audio_processor = CS5331 (type = 9) > ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x00ad2557, > Revision 0xdd302624 > [...] > tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles)) by insmod option > tuner: The type=<n> insmod option will go away soon. > [...] > ivtv: Setting Tuner 38 > tuner: type already set to 1, ignoring request for 38
I think this is the problem. You have a type 38 tuner but this is ignored because your tuner module is loaded with a "type=1" argument. Remove it and try it again. (I don't have any experiences with SuSE Linux, so I'm afraid I cannot tell you where to look for that option.) Regards, Christoph ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
