Sorry if you see this email a few time. I keep sending it under the wrong email address.
I have checked the video capture card to verify that it works and was able to get it working on Windows XP. With Linux as my OS of choice, the windows configuration only lasted long enough to test the card. SUSE is my OS of choice and until now I have not had any problems installing and using anything I've tried in Linux. I must admit that installing that video capture card has been a humbling experience. Has anyone had any success with a similar install? Help I am not able to get anything but static from my video capture card, Hauppauge PVR 500MCE. I am using the ivtv-0.3.6n driver, and have tried to use several others to no avail. SUSE 9.3, I've tried both the 32 bit and 64 bit versions. I have also tried it on two different computer, both are AMD 64's. I'm at a loss here for where to go next. Thanks for the help, Brad The dmesg says the following: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.2 (c) loading ivtv: Linux version: 2.6.11.4-21.7-default 586 REGPARM gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Unknown card: vendor/device: 4444/0016, subsystem vendor/device: > 0070/e807 ivtv: Defaulting to WinTV PVR 150 card ivtv: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv: card you have to the ivtv-devel mailinglist: http://sourceforge.net/projects/ivtv ivtv: Prefix your subject line with [UNKNOWN CARD]. ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 10 (level, low) -> IRQ 10 ivtv: VIA PCI device: 0x3188 vendor: 0x1106 wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005) wm8775: detecting client on address 0x36 wm8775: Offset reset.reg[0]=2e00 wm8775: Offset reset.reg[1]=0e00 wm8775: Offset reset.reg[2]=1600 wm8775: Offset reset.reg[3]=1800 wm8775: Offset reset.reg[4]=1a00 wm8775: Offset reset.reg[5]=1c00 wm8775: Offset reset.reg[6]=1e00 wm8775: Offset reset.reg[7]=2000 wm8775: Offset reset.reg[8]=2200 wm8775: Offset reset.reg[9]=2400 wm8775: Offset reset.reg[10]=2600 wm8775: Offset reset.reg[11]=2800 wm8775: Offset reset.reg[12]=2a00 wm8775: Updating reg[R23]=2e01 added Reset with default 1 wm8775: Updating reg[R7]=0e00 added TOD with default 0 wm8775: Updating reg[R11]=1600 added ADCHPD with default 0 wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0 wm8775: Updating reg[R11]=1620 added ADCWL with default 2 wm8775: Updating reg[R11]=1620 added ADCBCP with default 0 wm8775: Updating reg[R11]=1620 added ADCLRP with default 0 wm8775: Updating reg[R11]=1622 added ADCFMT with default 2 wm8775: Updating reg[R12]=1800 added ADCMS with default 0 wm8775: Updating reg[R12]=1800 added ADCOSR with default 0 wm8775: Updating reg[R12]=1802 added ADCRATE with default 2 wm8775: Updating reg[R13]=1a00 added AINPD with default 0 wm8775: Updating reg[R13]=1a00 added ADCPD with default 0 wm8775: Updating reg[R13]=1a00 added PWDN with default 0 wm8775: Updating reg[R14]=1c00 added ZCLA with default 0 wm8775: Updating reg[R14]=1ccf added LAG with default 207 wm8775: Updating reg[R15]=1e00 added ZCRA with default 0 wm8775: Updating reg[R15]=1ecf added RAG with default 207 wm8775: Updating reg[R16]=2000 added LCSEL with default 0 wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7 wm8775: Updating reg[R16]=207b added LCT with default 11 wm8775: Updating reg[R17]=2200 added LCEN with default 0 wm8775: Updating reg[R17]=2200 added ALCZC with default 0 wm8775: Updating reg[R17]=2200 added HLD with default 0 wm8775: Updating reg[R18]=2430 added DCY with default 3 wm8775: Updating reg[R18]=2432 added ATK with default 2 wm8775: Updating reg[R19]=2600 added NGTH with default 0 wm8775: Updating reg[R19]=2600 added NGAT with default 0 wm8775: Updating reg[R20]=2820 added TRANWIN with default 2 wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6 wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0 wm8775: Updating reg[R21]=2a00 added MUTELA with default 0 wm8775: Updating reg[R21]=2a00 added MUTERA with default 0 wm8775: Updating reg[R21]=2a01 added AMX with default 1 wm8775: Final reset.reg[0]=2e01 wm8775: Final reset.reg[1]=0e00 wm8775: Final reset.reg[2]=1622 wm8775: Final reset.reg[3]=1802 wm8775: Final reset.reg[4]=1a00 wm8775: Final reset.reg[5]=1ccf wm8775: Final reset.reg[6]=1ecf wm8775: Final reset.reg[7]=207b wm8775: Final reset.reg[8]=2200 wm8775: Final reset.reg[9]=2432 wm8775: Final reset.reg[10]=2600 wm8775: Final reset.reg[11]=2826 wm8775: Final reset.reg [12]=2a01 wm8775: Offset reset.reg[0]=2e00 wm8775: Offset reset.reg[1]=0e00 wm8775: Offset reset.reg[2]=1600 wm8775: Offset reset.reg[3]=1800 wm8775: Offset reset.reg[4]=1a00 wm8775: Offset reset.reg[5]=1c00 wm8775: Offset reset.reg[6]=1e00 wm8775: Offset reset.reg[7]=2000 wm8775: Offset reset.reg[8]=2200 wm8775: Offset reset.reg[9]=2400 wm8775: Offset reset.reg[10]=2600 wm8775: Offset reset.reg[11]=2800 wm8775: Offset reset.reg[12]=2a00 wm8775: Updating reg[R23]=2e01 added Reset with default 1 wm8775: Updating reg[R7]=0e00 added TOD with default 0 wm8775: Updating reg[R11]=1600 added ADCHPD with default 0 wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0 wm8775: Updating reg[R11]=1620 added ADCWL with default 2 wm8775: Updating reg[R11]=1620 added ADCBCP with default 0 wm8775: Updating reg[R11]=1620 added ADCLRP with default 0 wm8775: Updating reg[R11]=1622 added ADCFMT with default 2 wm8775: Updating reg[R12]=1800 added ADCMS with default 0 wm8775: Updating reg[R12]=1800 added ADCOSR with default 0 wm8775: Updating reg[R12]=1802 added ADCRATE with default 2 wm8775: Updating reg[R13]=1a00 added AINPD with default 0 wm8775: Updating reg[R13]=1a00 added ADCPD with default 0 wm8775: Updating reg[R13]=1a00 added PWDN with default 0 wm8775: Updating reg[R14]=1c00 added ZCLA with default 0 wm8775: Updating reg[R14]=1ccf added LAG with default 207 wm8775: Updating reg[R15]=1e00 added ZCRA with default 0 wm8775: Updating reg[R15]=1ecf added RAG with default 207 wm8775: Updating reg[R16]=2000 added LCSEL with default 0 wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7 wm8775: Updating reg[R16]=207b added LCT with default 11 wm8775: Updating reg[R17]=2200 added LCEN with default 0 wm8775: Updating reg[R17]=2200 added ALCZC with default 0 wm8775: Updating reg[R17]=2200 added HLD with default 0 wm8775: Updating reg[R18]=2430 added DCY with default 3 wm8775: Updating reg[R18]=2432 added ATK with default 2 wm8775: Updating reg[R19]=2600 added NGTH with default 0 wm8775: Updating reg[R19]=2600 added NGAT with default 0 wm8775: Updating reg[R20]=2820 added TRANWIN with default 2 wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6 wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0 wm8775: Updating reg[R21]=2a00 added MUTELA with default 0 wm8775: Updating reg[R21]=2a00 added MUTERA with default 0 wm8775: Updating reg[R21]=2a01 added AMX with default 1 wm8775: Final reset.reg[0]=2e01 wm8775: Final reset.reg[1]=0e00 wm8775: Final reset.reg[2]=1622 wm8775: Final reset.reg[3]=1802 wm8775: Final reset.reg[4]=1a00 wm8775: Final reset.reg[5]=1ccf wm8775: Final reset.reg[6]=1ecf wm8775: Final reset.reg[7]=207b wm8775: Final reset.reg[8]=2200 wm8775: Final reset.reg[9]=2432 wm8775: Final reset.reg[10]=2600 wm8775: Final reset.reg[11]=2826 wm8775: Final reset.reg[12]=2a01 wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02 wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00 wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03 wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00 wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00 wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01 wm8775: Updating register 0 (R23), config: 2e01 active: 2e00. wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00. wm8775: Updating register 2 (R11), config: 1622 active: 1621. wm8775: Updating register 3 (R12), config: 1802 active: 1902. wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00. wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf. wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf. wm8775: Skipping register 7 (R16), config: 207b active: 207b. wm8775: Skipping register 8 (R17), config: 2200 active: 2200. wm8775: Updating register 9 (R18), config: 2432 active: 2482. wm8775: Updating register 10 (R19), config: 2600 active: 2601. wm8775: Skipping register 11 (R20), config: 2826 active: 2826. wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f. ivtv: i2c attach [client=wm8775[8],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] tuner: type set to 57 (Philips FQ1236A MK4) by insmod option tuner: The type=<n> insmod option will go away soon. tuner: Please use the tuner=<n> option provided by tuner: tv aard core driver (bttv, saa7134, ...) instead. cx25840: unsupported module, tainting kernel. cx25840: Ignoring new-style parameters in presence of obsolete ones cx25840: starting probe for adapter SMBus Via Pro adapter at 0400 (0x0) cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: detecting client on address 0x88 cx25840: writing init values cx25840: Sequence tag: 'Boot.' cx25840: Sequence tag: 'FW DL Start' cx25840: Sequence tag: 'FW DL Stop' cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded. cx25840: FW image md5 digest: > a6f6a90a3be338cdb89d59e835798408 cx25840: FW image sha1 digest: > ad2872fb98ad43b6c4afa45d239a57010edebe84 cx25840: Status: cx258433 (DEVICE_ID) ivtv: i2c attach [client=cx25840[0],ok] cx25840: Status: 0x03 (REV_ID, Revision ID.) cx25840: Status: 'Mono' (Detected audio mode) cx25840: Status: 'No detected audio standard' (Detected audio standard) cx25840: Status: Video signal not present cx25840: Status: 0x01 (MICROCNTL_VIDEO_FORMAT, Detected video format) cx25840: Status: Ready Filter auto tuning status cx25840: Status: 0x17 (TUNE_OUT, The tuning code selected by the auto-tune algorithm.) cx25840: Status: 0x00 (MV_CDAT, Macrovision Copy Control Bits as described in the MacroVision) cx25840: Status: 0x00 (MV_PSP, Macrovision Pseudo Sync Pulses detected) cx25840: Status: 0x00 (MV_CS, Macrovision Color Striping Detected) cx25840: Status: 0x00 (MV_T3CS, A 1 indicates the presence of type 3 of the color stripe process. A) cx25840: Status: 0x00 (MV_TYPE2_PAIR, Macrovision Type 2 pair detected) cx25840: Status: 0x01 (AFD_FMT_STAT, Currently detected Format) cx25840: Status: 0x00 (FIELD, Field status (even/odd)) cx25840: Status: 0x00 (SRC_FIFO_OFLOW, Sample Rate Converter FIFO > Overflow) cx25840: Status: 0x00 (SRC_FIFO_UFLOW, Sample Rate Converter FIFO > Underflow) cx25840: Status: 0x01 (VSYNC, Vertical sync) cx25840: Status: 0x01 (HLOCK, Horizontal lock status) cx25840: Status: 0x00 (SRC_LOCK, Sample Rate Converter lock Status) cx25840: Status: 0x00 (VLOCK, Vertical lock status) cx25840: Status: 0x00 (CSC_LOCK, Color Subcarrier lock status) cx25840: Status: 0x01 (AGC_LOCK, VGA lock status) cx25840: Status: 0x00 (VPRES, Active-high video present. Indication of the presence of a) cx25840: Status: 0x00 (SPECIAL_PLAY_N, Active-low special play mode (fast forward, rewind, pulse, or slow) ivtv: requesting firmware ivtv: firmware loaded ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 4 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes > total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes > total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Could not detect tuner standard, defaulting to NTSC. cx25840: Status: 0x03 (REV_ID, Revision ID.) cx25840: Status: 'Mono' (Detected audio mode) cx25840: Status: 'No detected audio standard' (Detected audio standard) cx25840: Status: Video signal not present cx25840: Status: 0x03 (MICROCNTL_VIDEO_FORMAT, Detected video format) cx25840: Status: Ready Filter auto tuning status cx25840: Status: 0x17 (TUNE_OUT, The tuning code selected by the auto-tune algorithm.) cx25840: Status: 0x00 (MV_CDAT, Macrovision Copy Control Bits as described in the MacroVision) cx25840: Status: 0x00 (MV_PSP, Macrovision Pseudo Sync Pulses detected) cx25840: Status: 0x00 (MV_CS, Macrovision Color Striping Detected) cx25840: Status: 0x00 (MV_T3CS, A 1 indicates the presence of type 3 of the color stripe process. A) cx25840: Status: 0x00 (MV_TYPE2_PAIR, Macrovision Type 2 pair detected) cx25840: Status: 0x03 (AFD_FMT_STAT, Currently detected Format) cx25840: Status: 0x00 (FIELD, Field status (even/odd)) cx25840: Status: 0x00 (SRC_FIFO_OFLOW, Sample Rate Converter FIFO > Overflow) cx25840: Status: 0x00 (SRC_FIFO_UFLOW, Sample Rate Converter FIFO > Underflow) cx25840: Status: 0x01 (VSYNC, Vertical sync) cx25840: Status: 0x01 (HLOCK, Horizontal lock status) cx25840: Status: 0x00 (SRC_LOCK, Sample Rate Converter lock Status) cx25840: Status: 0x00 (VLOCK, Vertical lock status) cx25840: Status: 0x00 (CSC_LOCK, Color Subcarrier lock status) cx25840: Status: 0x00 (AGC_LOCK, VGA lock status) cx25840: Status: 0x00 (VPRES, Active-high video present. Indication of the presence of a) cx25840: Status: 0x00 (SPECIAL_PLAY_N, Active-low special play mode (fast forward, rewind, pulse, or slow) cx25840: decoder set input (6) cx25840: Sequence tag: 'Tunner 150' cx25840: decoder set output ivtv: Switching standard to NTSC. cx25840: Status: 0x03 (REV_ID, Revision ID.) cx25840: Status: 'Mono' (Detected audio mode) cx25840: Status: 'No detected audio standard' (Detected audio standard) cx25840: Status: Video signal not present cx25840: Status: 0x01 (MICROCNTL_VIDEO_FORMAT, Detected video format) cx25840: Status: Ready Filter auto tuning status cx25840: Status: 0x17 (TUNE_OUT, The tuning code selected by the auto-tune algorithm.) cx25840: Status: 0x00 (MV_CDAT, Macrovision Copy Control Bits as described in the MacroVision) cx25840: Status: 0x00 (MV_PSP, Macrovision Pseudo Sync Pulses detected) cx25840: Status: 0x00 (MV_CS, Macrovision Color Striping Detected) cx25840: Status: 0x00 (MV_T3CS, A 1 indicates the presence of type 3 of the color stripe process. A) cx25840: Status: 0x00 (MV_TYPE2_PAIR, Macrovision Type 2 pair detected) cx25840: Status: 0x01 (AFD_FMT_STAT, Currently detected Format) cx25840: Status: 0x01 (FIELD, Field status (even/odd)) cx25840: Status: 0x00 (SRC_FIFO_OFLOW, Sample Rate Converter FIFO > Overflow) cx25840: Status: 0x00 (SRC_FIFO_UFLOW, Sample Rate Converter FIFO > Underflow) cx25840: Status: 0x01 (VSYNC, Vertical sync) cx25840: Status: 0x00 (HLOCK, Horizontal lock status) cx25840: Status: 0x00 (SRC_LOCK, Sample Rate Converter lock Status) cx25840: Status: 0x00 (VLOCK, Vertical lock status) cx25840: Status: 0x00 (CSC_LOCK, Color Subcarrier lock status) cx25840: Status: 0x00 (AGC_LOCK, VGA lock status) cx25840: Status: 0x00 (VPRES, Active-high video present. Indication of the presence of a) cx25840: Status: 0x00 (SPECIAL_PLAY_N, Active-low special play mode (fast forward, rewind, pulse, or slow) cx25840: decoder set norm NTSC cx25840: Status: 0x03 (REV_ID, Revision ID.) cx25840: Status: 'Mono' (Detected audio mode) cx25840: Status: 'No detected audio standard' (Detected audio standard) cx25840: Status: Video signal not present cx25840: Status: 0x01 (MICROCNTL_VIDEO_FORMAT, Detected video format) cx25840: Status: Ready Filter auto tuning status cx25840: Status: 0x17 (TUNE_OUT, The tuning code selected by the auto-tune algorithm.) cx25840: Status: 0x00 (MV_CDAT, Macrovision Copy Control Bits as described in the MacroVision) cx25840: Status: 0x00 (MV_PSP, Macrovision Pseudo Sync Pulses detected) cx25840: Status: 0x00 (MV_CS, Macrovision Color Striping Detected) cx25840: Status: 0x00 (MV_T3CS, A 1 indicates the presence of type 3 of the color stripe process. A) cx25840: Status: 0x00 (MV_TYPE2_PAIR, Macrovision Type 2 pair detected) cx25840: Status: 0x01 (AFD_FMT_STAT, Currently detected Format) cx25840: Status: 0x01 (FIELD, Field status (even/odd)) cx25840: Status: 0x00 (SRC_FIFO_OFLOW, Sample Rate Converter FIFO > Overflow) cx25840: Status: 0x00 (SRC_FIFO_UFLOW, Sample Rate Converter FIFO > Underflow) cx25840: Status: 0x01 (VSYNC, Vertical sync) cx25840: Status: 0x00 (HLOCK, Horizontal lock status) cx25840: Status: 0x00 (SRC_LOCK, Sample Rate Converter lock Status) cx25840: Status: 0x00 (VLOCK, Vertical lock status) cx25840: Status: 0x00 (CSC_LOCK, Color Subcarrier lock status) cx25840: Status: 0x00 (AGC_LOCK, VGA lock status) cx25840: Status: 0x00 (VPRES, Active-high video present. Indication of the presence of a) cx25840: Status: 0x00 (SPECIAL_PLAY_N, Active-low special play mode (fast forward, rewind, pulse, or slow) cx25840: set audio: 0x01 cx25840: Sequence tag: 'Sample rate' ivtv: Initialized WinTV PVR 150, card #0 ivtv: Unknown card: vendor/device: 4444/0016, subsystem vendor/device: > 0070/e817 ivtv: Defaulting to WinTV PVR 150 card ivtv: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv: card you have to the ivtv-devel mailinglist: http://sourceforge.net/projects/ivtv ivtv: Prefix your subject line with [UNKNOWN CARD]. ivtv: Found an iTVC16 based chip ivtv: ivtv_enc_thread: pid = 29121, itv = 0xe136a3a0 ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 3 (level, low) -> IRQ 3 ivtv: VIA PCI device: 0x3188 vendor: 0x1106 wm8775: starting probe for adapter ivtv i2c driver #1 (0x10005) wm8775: detecting client on address 0x36 wm8775: Offset reset.reg[0]=2e00 =====clipped off because of email limit but basically repeats from here for the other inputs ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
