I've done everything in this thread and I am still getting only static. I have looked to see if there are any other instances of the ivtv modules and there is only one, /lib/modules/.../ivtv.
Here is the dmesg that I get. I don't see anything in it. What am I missing? Brad ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.6 (p) loading ivtv: Linux version: 2.6.11.4-21.7-default 586 REGPARM gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 10 (level, low) -> IRQ 10 ivtv: VIA PCI device: 0x3188 vendor: 0x1106 tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7769564 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: cx25843-23 found. Initializing... cx25840: requesting /lib/modules/HcwMakoA.ROM cx25840: firmware loaded ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000000 ivtv: NTSC tuner detected ivtv: Radio detected ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device for encoder MPEG minor 0 ivtv: Create DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Registered v4l2 device for encoder YUV minor 32 ivtv: Create DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv: Registered v4l2 device for encoder VBI minor 224 ivtv: Create DMA encoder VBI stream: 240 x 8736 buffers (2048KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 24 ivtv: Create DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv: Registered v4l2 device for encoder radio minor 64 ivtv: Create encoder radio stream ivtv: Setting Tuner 57 tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0 cx25840: decoder set norm NTSC cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: Switching standard to NTSC. cx25840: decoder set norm NTSC ivtv: Initialized WinTV PVR 150, card #0 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ivtv: ivtv_enc_thread: pid = 10333, itv = 0xe1ac4b20 ivtv: ivtv_enc_vbi_thread: pid = 10334, itv = 0xe1ac4b20 ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 3 (level, low) -> IRQ 3 ivtv: VIA PCI device: 0x3188 vendor: 0x1106 tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7769564 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: cx25843-23 found. Initializing... cx25840: requesting /lib/modules/HcwMakoA.ROM cx25840: firmware loaded ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000000 ivtv: Radio detected ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device for encoder MPEG minor 1 ivtv: Create DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Registered v4l2 device for encoder YUV minor 33 ivtv: Create DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv: Registered v4l2 device for encoder VBI minor 225 ivtv: Create DMA encoder VBI stream: 240 x 8736 buffers (2048KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 25 ivtv: Create DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv: Registered v4l2 device for encoder radio minor 65 ivtv: Create encoder radio stream ivtv: Setting Tuner 57 tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 cx25840: decoder set norm NTSC cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: Switching standard to NTSC. cx25840: decoder set norm NTSC ivtv: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ==================== ivtv: ivtv_enc_thread: pid = 10385, itv = 0xe1ae7e00 ivtv: ivtv_enc_vbi_thread: pid = 10386, itv = 0xe1ae7e00 ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
