hi, i have read many different howtos and tutorials but i still dont get my PVR350 to work. i dont no whats wrong, all y got is a flickering black/with red/bku/green picture.
dmesg: tuner: Ignoring new-style parameters in presence of obsolete ones Linux video capture interface: v1.00 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.6 (x) loading ivtv: Linux version: 2.6.11.11MischaSATA preempt PENTIUM4 4KSTACKS gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x0655 vendor: 0x1039 tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] msp34xx: ivtv version msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Jul 9 2005 19:10:01 ivtv: i2c attach [client=MSP3418W-B3,ok] tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7853385 tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = CS5331 (type = 9) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x00ad2557, Revision 0x00000001 ivtv: PAL tuner detected ivtv: Radio detected saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[50],ok] saa7115: status: (1E) 0x40, (1F) 0xc0 saa7127: Ignoring new-style parameters in presence of obsolete ones saa7127: video encoder driver version V 0.3 loaded saa7127: detecting saa7127 client on address 0x88 saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[50],ok] ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 10 streams ivtv: Registered v4l2 device for encoder MPEG minor 0 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 32 ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 224 ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 24 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Registered v4l2 device for encoder radio minor 64 ivtv: Create encoder radio stream ivtv: Registered v4l2 device for decoder MPEG minor 16 ivtv: Create DMA decoder MPEG stream: 0 x 65536 buffers (0KB total) ivtv: Registered v4l2 device for decoder VBI minor 228 ivtv: Create DMA decoder VBI stream: 0 x 2048 buffers (0KB total) ivtv: Registered v4l2 device for decoder VOUT minor 232 ivtv: Create decoder VOUT stream ivtv: Registered v4l2 device for decoder YUV minor 48 ivtv: Create DMA decoder YUV stream: 0 x 51840 buffers (0KB total) ivtv: Create DMA decoder OSD stream: 0 x 65536 buffers (0KB total) ivtv: Setting Tuner 38 tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 saa7115: decoder set norm PAL saa7115: set audio: 0x01 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to PAL. ivtv: ivtv_enc_thread: pid = 1116, itv = 0xf8933fa0 ivtv: ivtv_enc_vbi_thread: pid = 1117, itv = 0xf8933fa0 ivtv: ivtv_dec_thread: pid = 1118, itv = 0xf8933fa0 ivtv: ivtv_dec_vbi_thread: pid = 1119, itv = 0xf8933fa0 saa7115: decoder set norm PAL saa7115: set audio: 0x01 saa7127: Setting Encoder Video Standard saa7127: Set PAL Video Mode saa7127: Selecting PAL video Standard ivtv: Initialized WinTV PVR 350, card #0 ivtv: ==================== END INIT IVTV ==================== bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture entry in /etc/modules: alias char-major-81 videodev alias char-major-81-0 ivtv options ivtv ivtv_std=2 tda9887=0 mpg_buffers=90 tda9887=0 add below ivtv msp3400 saa7115 saa7127 tda9887 options msp3400 once=1 simple=1 standard=03 i2c-core i2c-algo-bit tuner msp3400 videodev ivtv bttv dmesg at watching lousy tv output: ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1444 ivtv: Setup VBI start 0x002fea04 frames 4 fpi 1 lines 0x000000f1 saa7115: decoder disable output saa7115: decoder enable output please help me, im realy confused :) thanks ------------------------------------------------------- This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual core and dual graphics technology at this free one hour event hosted by HP, AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
