Daniel and Mary-Beth Sherwood wrote:
Hi
I have had a PVR150 system working for a while now and
use an ATI Remote Wonder as the remote control.
Recently howvere I have seen e-mails on this list
regarding getting the PVR150 IR Blaster working.
This would be a good feature fo me to have so I can
control the SKY satellite box so I thought I'd have a
go at installing it following Mark's instructions.
However when I run modprobe lirc_i2c, the /dev/lirc
device fails to appear. Looking at the kernel log
below, I can see that this is because the lirc_i2c
driver fails to find the device on the I2C bus. Ive
tried this on the patched version supplied by Mark and
the 0.7.2 release of LIRC.
Any thoughts on this, and yes I do hae a non-MCE card
with a IR Blaster cable.
Given I have the exact same model of card (x2 in fact) this ought to
work. Can you try powering the machine off and then on again and
reloading the module? During testing I've managed to get the IR chip
into a state where I had to do this in order to get it to start
responding again (a soft reboot didn't clear the issue, presumably as
the chip wasn't actually powered off).
I can't think of anything else that might cause this -- at the very
least the remote ought to work with the release version of LIRC.
HTH,
Mark
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
