On Mon, 22 Aug 2005, Chris Woen wrote: >I'm using a PVR150 with kernel 2.6.12, ivtv 3.7a since about one month. >Until the last week everything worked well, that means, setting the >exact frequencies of the local upc channels made a clear picture and >the audio was right tuned as well. >But last week most of the channels had no more sound. Only 2-3 from ~50 >could be heard. Albeit I made no hardware or software changes. >By trying everything I could, I discovered, if I set >the freq a bit lower (-0.15MHz as the official, and before working >values) then almost all channels have the sound again. But not all... >There are 3 channels (one of them is a music channel :-( ), which >cannot be tuned to hear its sound.
Where do you live, and what's your local flavour of PAL? http://en.wikipedia.org/wiki/Broadcast_television_systems I think you have the same problem as me; however, what follows is wild speculation :) The FM1216ME (MK3) / FQ1216ME_MK3 tuner uses what I believe is an incompatible PAL setting to previous Philips tuners, so you're getting the default (whichever that is). Notice on that Wikipedia page how the sound offset for PAL varies by up to 1 MHz depending on the sub-type. I notice you're using the "type=" override for your card; with the latest driver, is the card correctly detected (i.e. listed in tveeprom.c)? tveeprom: Hauppauge: model = 26039, rev = C1A5, serial# = 8034243 tveeprom: tuner = <unknown> (idx = 105, type = 4) Cheers, Phil ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
