> Oh, I did not mention. I live in hungary, the used standard is PAL, > which PAL, i don't know. Hmm Hungary was hard ;-)... On the net a lot of sites say you run SECAM, but at least some of them say you run PAL D or K (depending on VHF or UHF). As Philip posted you might have a problem with your "sound offset" which is 6.5MHz where most others use 5.5MHz.
You should be able to check what value is set in your system by adding "options tda9887 debug=3". > Strange, because it worked about two weeks ago. It is possible in theory, > that the provider changed something, but I hardly believe it. If you say it works by offset the channel by 0.15MHz it could be because of them calibrating something on their side (ie tune it correctly). BUT two weeks ago you didn't run 0.3.7h, right?? So have you tried to revert back to the last working version and verify that the problem doesn't go away?? > No, it sets NoTuner by default for me, see below. With which tuner type > do you use it? Hmm, can it be a "TCL MPE05 Mk2"?? /Corax
