Hi, similar to someone from earlier today, I hear sound on most channels save for a few. No matter what I do, I get no sound on channels 17,18,19 and 24. I'm running Ubuntu hoary on linux 2.6.10. My problem has persisted across severalversions of ivtv, although right now I'm on 0.3.7d. I'm including my dmesg output, does anyone have any idea where I should look next??
thanks Dave ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.7 (d) loading ivtv: Linux version: 2.6.10-5-686 preempt 686 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 17 tveeprom: Hauppauge: model = 26032, rev = C199, serial# = 208387 tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = TDA9850 (type = 3) ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] cx25840: starting probe on adapter ivtv i2c driver #0 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: cx25841-23 found. Initializing... cx25840: requesting /lib/modules/HcwMakoA.ROM cx25840: firmware loaded ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model 0x008d1659, Revision 0x00000000 ivtv: NTSC tuner detected ivtv: Radio detected ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device for encoder MPEG minor 0 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 32 ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 224 ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 24 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Registered v4l2 device for encoder radio minor 64 ivtv: Create encoder radio stream ivtv: Setting Tuner 50 tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0 cx25840: decoder set norm NTSC cx25840: decoder set input (6) cx25840: now setting Tuner input ivtv: ivtv_enc_thread: pid = 13111, itv = 0xd03aede0 ivtv: ivtv_enc_vbi_thread: pid = 13112, itv = 0xd03aede0 cx25840: set audio input (0) ivtv: Switching standard to NTSC. cx25840: decoder set norm NTSC cx25840: decoder disable output cx25840: decoder enable output cx25840: decoder set norm NTSC cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
