-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hans Verkuil wrote: > On Sunday 28 August 2005 22:55, Stefan van der Eijk wrote: > >>I'm seeing some artifacts on my screen in mythtv with 0.3.7k that I >>didn't see with 0.3.7g. They seem to be little white lines, mostly >>horizontal, but sometimes also vertical. >> >>Is anybody else seeing this? > > > Can you test the intervening versions h-j to check when exactly it appears? > And can you also post the IVTV messages from dmesg.
0.3.7g doesn't have the artifacts. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.7 (g) loading ivtv: Linux version: 2.6.12-10mdk 686 gcc-4.0 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8027490 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 TEA5767 detected. ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60] tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect type set to 62 (Philips TEA5767HN FM Radio) tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840: firmware /lib/modules/HcwMakoA.ROM loaded ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44] ivtv: i2c attach to card #0 ok [client=wm8775[50], addr=1b] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv: Detected a TEA5767 radio tuner. Enabling radio support. ivtv: Encoder revision: 0x02040011 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Create encoder radio stream tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #0 ivtv: Initialized WinTV PVR 150, card #0 ivtv: ====================== NEXT CARD ====================== ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8027490 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61] cx25840: firmware /lib/modules/HcwMakoA.ROM loaded ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44] ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #1 ok [client=tda9887, addr=43] ivtv: Encoder revision: 0x02040011 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1 ivtv: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ==================== ivtv warning: Sliced VBI not supported for cx25840 so no vbi re-insertion possible yet ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Removed WinTV PVR 150, card #0 ivtv: Removed WinTV PVR 150, card #1 0.3.7h has the artifacts. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.7 (h) loading ivtv: Linux version: 2.6.12-10mdk 686 gcc-4.0 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8027490 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 TEA5767 detected. ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60] tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect type set to 62 (Philips TEA5767HN FM Radio) tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840: firmware /lib/modules/HcwMakoA.ROM loaded ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44] ivtv: i2c attach to card #0 ok [client=wm8775[50], addr=1b] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv: Detected a TEA5767 radio tuner. Enabling radio support. ivtv: Encoder revision: 0x02040011 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) ivtv: Create DMA encoder VBI stream: 0 x 26208 buffers (0KB total) ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Create encoder radio stream tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #0 ivtv: Initialized WinTV PVR 150, card #0 ivtv: ====================== NEXT CARD ====================== ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8027490 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61] cx25840: firmware /lib/modules/HcwMakoA.ROM loaded ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44] ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #1 ok [client=tda9887, addr=43] ivtv: Encoder revision: 0x02040011 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) ivtv: Create DMA encoder VBI stream: 0 x 26208 buffers (0KB total) ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1 ivtv: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ==================== ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) and this was 0.3.7k: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.7 (k) loading ivtv: Linux version: 2.6.12-10mdk 686 gcc-4.0 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8027490 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] ivtv: This is the first unit of a PVR500 tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 TEA5767 detected. ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60] tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect type set to 62 (Philips TEA5767HN FM Radio) tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840: firmware /lib/modules/HcwMakoA.ROM loaded ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44] ivtv: i2c attach to card #0 ok [client=wm8775[50], addr=1b] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv: Detected a TEA5767 radio tuner. Enabling radio support. ivtv: Encoder revision: 0x02040011 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) ivtv: Create DMA encoder VBI stream: 0 x 26208 buffers (0KB total) ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Create encoder radio stream tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #0 ivtv: Initialized WinTV PVR 150, card #0 ivtv: ====================== NEXT CARD ====================== ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8027490 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61] cx25840: firmware /lib/modules/HcwMakoA.ROM loaded ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44] ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #1 ok [client=tda9887, addr=43] ivtv: This is the second unit of a PVR500 ivtv: Correcting tveeprom data: no radio present on second tuner ivtv: Encoder revision: 0x02040011 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) ivtv: Create DMA encoder VBI stream: 0 x 26208 buffers (0KB total) ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1 ivtv: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ==================== and this is the difference: - --- 0.3.7g.txt 2005-08-28 23:41:09.000000000 +0200 +++ 0.3.7h.txt 2005-08-28 23:41:29.000000000 +0200 @@ -1,5 +1,5 @@ - -ivtv: ==================== START INIT IVTV ==================== - -ivtv: version 0.3.7 (g) loading +vtv: ==================== START INIT IVTV ==================== +ivtv: version 0.3.7 (h) loading ivtv: Linux version: 2.6.12-10mdk 686 gcc-4.0 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when @@ -9,7 +9,8 @@ tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8027490 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) - -tveeprom: audio_processor = MSP3410D (type = 5) +tveeprom: audio processor = CX25843 (type = 25) +tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 @@ -28,7 +29,7 @@ ivtv: Encoder revision: 0x02040011 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) - -ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) +ivtv: Create DMA encoder VBI stream: 0 x 26208 buffers (0KB total) ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Create encoder radio stream tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #0 @@ -39,7 +40,8 @@ tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8027490 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) - -tveeprom: audio_processor = MSP3410D (type = 5) +tveeprom: audio processor = CX25843 (type = 25) +tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61] @@ -51,7 +53,7 @@ ivtv: Encoder revision: 0x02040011 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) - -ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) +ivtv: Create DMA encoder VBI stream: 0 x 26208 buffers (0KB total) ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1 ivtv: Initialized WinTV PVR 150, card #1 and: - --- 0.3.7h.txt 2005-08-28 23:41:29.000000000 +0200 +++ 0.3.7k.txt 2005-08-28 23:44:06.000000000 +0200 @@ -1,5 +1,5 @@ - -vtv: ==================== START INIT IVTV ==================== - -ivtv: version 0.3.7 (h) loading +ivtv: ==================== START INIT IVTV ==================== +ivtv: version 0.3.7 (k) loading ivtv: Linux version: 2.6.12-10mdk 686 gcc-4.0 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when @@ -12,7 +12,7 @@ tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] - -tuner: Ignoring new-style parameters in presence of obsolete ones +ivtv: This is the first unit of a PVR500 tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 TEA5767 detected. ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60] @@ -50,6 +50,8 @@ ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #1 ok [client=tda9887, addr=43] +ivtv: This is the second unit of a PVR500 +ivtv: Correcting tveeprom data: no radio present on second tuner ivtv: Encoder revision: 0x02040011 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFDEjBzP2I1mFDTZ8URAsTzAJ0QTnYOKoaYB4/rZtSaoYsfdzw7fwCdFkU6 Ni5KE2B1Gg0rWH3mGxGwQnY= =NPy/ -----END PGP SIGNATURE----- ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
