Yeah, I am curious too as to how to get radio working with my PVR 150 MCE. What specific driver versions, firmware versions, applications, and configuration options have you used to get the radio working?
I cannot seem to get it working on my AMD64 machine using various driver and firmware versions. Whenever I scan, the scan seems to use a lot of CPU power, and not reasonable results are returned. If it is possible, could someone please provide a concrete guide as to how to get this to work? On 9/15/05, Vedran Rodic <[EMAIL PROTECTED]> wrote: > > > > Vedran & Fransesco, > > > > Can you both post the IVTV BEGIN-END messages from your kernel log? It works > > fine here (BTW audio arrives at video24, not video32). It might be a tuner > > related problem. > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.3.8 (snapshot compiled on Mon Sep 12 15:41:46 2005) loading > ivtv: Linux version: 2.6.13.1 preempt PENTIUMIII gcc-4.0 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) > ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 9 > PCI: setting IRQ 9 as level-triggered > ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNK4] -> GSI 9 (level, low) -> > IRQ9 > ivtv: Unreasonably low latency timer, setting to 64 (was 32) > tveeprom: Hauppauge: model = 26559, rev = C257, serial# = 7524576 > tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) > tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, > v4l2 = 0x00400e17) > tveeprom: audio processor = CX25843 (type = 25) > tveeprom: decoder processor = CX25843 (type = 1e) > ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] > cx25840: loading /lib/modules/HcwMakoA.ROM > ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44] > ivtv: i2c attach to card #0 ok [client=wm8775[50], addr=1b] > ivtv: loading /lib/modules/ivtv-fw-enc.bin > ivtv: Encoder revision: 0x02050032 > ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!! > ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) > ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) > ivtv: Create DMA encoder VBI stream: 0 x 26208 buffers (0KB total) > ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) > ivtv: Create encoder radio stream > tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c > driver #0 > ivtv: Initialized WinTV PVR 150, card #0 > ivtv: ==================== END INIT IVTV ==================== > > > ------------------------------------------------------- > SF.Net email is sponsored by: > Tame your development challenges with Apache's Geronimo App Server. > Download it for free - -and be entered to win a 42" plasma tv or your very > own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php > _______________________________________________ > ivtv-devel mailing list > ivtv-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
