On Nov 25, 2005, at 8:46 AM, Mythtv wrote:
Hello,
I have an Fedora core 4 installation with an hauppage PVR500 installed
in my system. The ivtv driver is loading well (i think) but it is
impossible for me to tune to a frequency (and see something which is
oke). Here the /var/log/messages file :
Nov 25 15:31:21 localhost kernel: ivtv: ==================== START
INIT
IVTV ====================
Nov 25 15:31:21 localhost kernel: ivtv: version 0.4.0 (tagged
release)
loading Nov 25 15:31:21 localhost kernel: ivtv: Linux version:
2.6.14-1.1637_FC4 686 RE
GPARM 4KSTACKS gcc-4.0
Nov 25 15:31:21 localhost kernel: ivtv: In case of problems please
include the
debug info
Nov 25 15:31:21 localhost kernel: ivtv: between the START INIT
IVTV and
END INI
T IVTV lines when
Nov 25 15:31:21 localhost kernel: ivtv: mailing the ivtv-devel
mailinglist.
Nov 25 15:31:21 localhost kernel: ivtv0: Autodetected WinTV PVR 150
card
(iTVC16 based)
Nov 25 15:31:21 localhost kernel: ACPI: PCI Interrupt 0000:04:08.0
[A] ->
Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Nov 25 15:31:21 localhost kernel: tveeprom: Second (radio) tuner
idx 101
Nov 25 15:31:21 localhost kernel: tveeprom: ivtv version
Nov 25 15:31:21 localhost kernel: tveeprom: tuner = Philips FQ1216AME
MK4 (idx = 91, type = 56)
This is really bizarre. tveeprom is the ivtv version, and yet it
does not identify the model and serial number of the PVR card. I've
never seen that before.
<snip>
rd #0
Nov 25 15:31:23 localhost kernel: ivtv: ====================== NEXT
CARD ====
==================
Nov 25 15:31:23 localhost kernel: ivtv1: Autodetected WinTV PVR 150
card
(iTVC16
based)
Nov 25 15:31:23 localhost kernel: ACPI: PCI Interrupt 0000:04:09.0
[A] ->
Link [L
NKA] -> GSI 11 (level, low) -> IRQ 11
Nov 25 15:31:23 localhost kernel: tveeprom: Second (radio) tuner
idx 101
Nov 25 15:31:23 localhost kernel: tveeprom: ivtv version
Nov 25 15:31:23 localhost kernel: tveeprom: Hauppauge: model = 23559,
rev = D591
, serial# = 8027789
This is what the first tuner should have looked like. Not sure why
this line is missing from the first tuner.
Nov 25 15:31:23 localhost kernel: tveeprom: tuner = Philips FQ1216AME
MK4 (idx =
91, type = 56)
<snip>
When i'm tuning the PVR to a channel (ivtvctl -d /dev/video0 -p 6 -r
216) and then cat /dev/video0 /tmp/video0.mpg this will only give
noise
and a little bit of the frequency i tuned on.
Try this with the second tuner : use video1 instead of video0 and see
what results you get. You might also try other inputs instead of
just number 6 - I'm not sure which input is the tv tuner on your
model. If the second tuner works, you might have to get this on the
devel list.
Keith C
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
