Hi Keith, I've read an article about the bios of my pc wich could be the problem. I've updated it with the newest version and ...... the model and serial number ar now in the message file. But still the problem is the same. The p6 is the right tuner (ivtvctl -n say's so).
Ther one thing i find a bit stange in the message file. Look at this : Nov 25 21:39:57 localhost kernel: ivtv: no version for "struct_module" found: kernel tainted. This messages is just before the INIT IVTV. Here's the new log of IVTV-INIT : Nov 25 21:39:57 localhost kernel: ivtv: ==================== START INIT IVTV ==================== Nov 25 21:39:57 localhost kernel: ivtv: version 0.4.0 (tagged release) loading Nov 25 21:39:57 localhost kernel: ivtv: Linux version: 2.6.14-1.1637_FC4 686 RE GPARM 4KSTACKS gcc-4.0 Nov 25 21:39:57 localhost kernel: ivtv: In case of problems please include the debug info Nov 25 21:39:57 localhost kernel: ivtv: between the START INIT IVTV and END INI T IVTV lines when Nov 25 21:39:57 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. Nov 25 21:39:58 localhost kernel: ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based) Nov 25 21:39:58 localhost kernel: ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 Nov 25 21:39:58 localhost gpm[2622]: *** info [startup.c(95)]: Nov 25 21:39:58 localhost kernel: tveeprom: Second (radio) tuner idx 101 Nov 25 21:39:58 localhost gpm[2622]: Started gpm successfully. Entered daemon mode. Nov 25 21:39:58 localhost kernel: tveeprom: ivtv version Nov 25 21:39:58 localhost kernel: tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8027789 Nov 25 21:39:58 localhost kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) Nov 25 21:39:58 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Nov 25 21:39:58 localhost kernel: tveeprom: audio processor = CX25843 (type = 25) Nov 25 21:39:58 localhost kernel: tveeprom: decoder processor = CX25843 (type = 1e) Nov 25 21:39:58 localhost kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] Nov 25 21:39:58 localhost kernel: ivtv0: This is the first unit of a PVR500 Nov 25 21:39:58 localhost kernel: tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 Nov 25 21:39:58 localhost gpm[2622]: *** info [mice.c(1766)]: Nov 25 21:39:58 localhost kernel: TEA5767 detected. Nov 25 21:39:59 localhost gpm[2622]: imps2: Auto-detected intellimouse PS/2 Nov 25 21:39:59 localhost kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60] Nov 25 21:39:59 localhost kernel: tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect Nov 25 21:39:59 localhost kernel: type set to 62 (Philips TEA5767HN FM Radio) Nov 25 21:39:59 localhost kernel: tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Nov 25 21:39:59 localhost kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] Nov 25 21:39:59 localhost kernel: cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) Nov 25 21:39:59 localhost kernel: cx25840 0-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes) Nov 25 21:39:59 localhost kernel: ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] Nov 25 21:39:59 localhost kernel: wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) Nov 25 21:39:59 localhost kernel: ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] Nov 25 21:39:59 localhost kernel: tda9885/6/7: (ivtv) chip found @ 0x86 Nov 25 21:39:59 localhost kernel: ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] Nov 25 21:39:59 localhost kernel: ivtv0: Detected a TEA5767 radio tuner. Enabling radio support. Nov 25 21:39:59 localhost kernel: ivtv0: loading /lib/modules/ivtv-fw-enc.bin Nov 25 21:39:59 localhost kernel: ivtv0: Encoder revision: 0x02050032 Nov 25 21:39:59 localhost kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) Nov 25 21:39:59 localhost kernel: ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) Nov 25 21:39:59 localhost kernel: ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) Nov 25 21:39:59 localhost kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) Nov 25 21:39:59 localhost kernel: ivtv0: Create encoder radio stream Nov 25 21:39:59 localhost kernel: tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #0 Nov 25 21:39:59 localhost kernel: ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 Nov 25 21:39:59 localhost kernel: ivtv: ====================== NEXT CARD ====================== Nov 25 21:40:00 localhost kernel: ivtv1: Autodetected WinTV PVR 150 card (iTVC16 based) Nov 25 21:40:00 localhost kernel: ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Nov 25 21:40:00 localhost kernel: tveeprom: Second (radio) tuner idx 101 Nov 25 21:40:00 localhost kernel: tveeprom: ivtv version Nov 25 21:40:00 localhost kernel: tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8027789 Nov 25 21:40:00 localhost kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) Nov 25 21:40:00 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Nov 25 21:40:00 localhost kernel: tveeprom: audio processor = CX25843 (type = 25) Nov 25 21:40:00 localhost kernel: tveeprom: decoder processor = CX25843 (type = 1e) Nov 25 21:40:00 localhost kernel: ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] Nov 25 21:40:00 localhost kernel: tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 Nov 25 21:40:00 localhost kernel: ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61] Nov 25 21:40:00 localhost kernel: cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) Nov 25 21:40:00 localhost kernel: cx25840 1-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes) Nov 25 21:40:00 localhost kernel: ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44] Nov 25 21:40:00 localhost kernel: wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) Nov 25 21:40:00 localhost kernel: ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b] Nov 25 21:40:00 localhost kernel: tda9885/6/7: (ivtv) chip found @ 0x86 Nov 25 21:40:00 localhost kernel: ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43] Nov 25 21:40:00 localhost kernel: ivtv1: This is the second unit of a PVR500 Nov 25 21:40:00 localhost kernel: ivtv1: Correcting tveeprom data: no radio present on second unit Nov 25 21:40:00 localhost kernel: ivtv1: loading /lib/modules/ivtv-fw-enc.bin Nov 25 21:40:00 localhost kernel: ivtv1: Encoder revision: 0x02050032 Nov 25 21:40:00 localhost kernel: ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) Nov 25 21:40:00 localhost kernel: ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) Nov 25 21:40:00 localhost kernel: ivtv1: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) Nov 25 21:40:00 localhost kernel: ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) Nov 25 21:40:00 localhost kernel: tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1 Nov 25 21:40:00 localhost kernel: ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 Nov 25 21:40:00 localhost kernel: ivtv: ==================== END INIT IVTV ==================== Thanks so far..... Greetings, Leo. On Fri, 2005-11-25 at 11:27 -0600, Keith C wrote: > On Nov 25, 2005, at 8:46 AM, Mythtv wrote: > > > Hello, > > > > I have an Fedora core 4 installation with an hauppage PVR500 installed > > in my system. The ivtv driver is loading well (i think) but it is > > impossible for me to tune to a frequency (and see something which is > > oke). Here the /var/log/messages file : > > > > > > > > > > Nov 25 15:31:21 localhost kernel: ivtv: ==================== START > > INIT > > IVTV ==================== > > Nov 25 15:31:21 localhost kernel: ivtv: version 0.4.0 (tagged > > release) > > loading Nov 25 15:31:21 localhost kernel: ivtv: Linux version: > > 2.6.14-1.1637_FC4 686 RE > > GPARM 4KSTACKS gcc-4.0 > > Nov 25 15:31:21 localhost kernel: ivtv: In case of problems please > > include the > > debug info > > Nov 25 15:31:21 localhost kernel: ivtv: between the START INIT > > IVTV and > > END INI > > T IVTV lines when > > Nov 25 15:31:21 localhost kernel: ivtv: mailing the ivtv-devel > > mailinglist. > > Nov 25 15:31:21 localhost kernel: ivtv0: Autodetected WinTV PVR 150 > > card > > (iTVC16 based) > > Nov 25 15:31:21 localhost kernel: ACPI: PCI Interrupt 0000:04:08.0 > > [A] -> > > Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 > > Nov 25 15:31:21 localhost kernel: tveeprom: Second (radio) tuner > > idx 101 > > Nov 25 15:31:21 localhost kernel: tveeprom: ivtv version > > Nov 25 15:31:21 localhost kernel: tveeprom: tuner = Philips FQ1216AME > > MK4 (idx = 91, type = 56) > > This is really bizarre. tveeprom is the ivtv version, and yet it > does not identify the model and serial number of the PVR card. I've > never seen that before. > > > <snip> > > > rd #0 > > Nov 25 15:31:23 localhost kernel: ivtv: ====================== NEXT > > CARD ==== > > ================== > > Nov 25 15:31:23 localhost kernel: ivtv1: Autodetected WinTV PVR 150 > > card > > (iTVC16 > > based) > > Nov 25 15:31:23 localhost kernel: ACPI: PCI Interrupt 0000:04:09.0 > > [A] -> > > Link [L > > NKA] -> GSI 11 (level, low) -> IRQ 11 > > Nov 25 15:31:23 localhost kernel: tveeprom: Second (radio) tuner > > idx 101 > > Nov 25 15:31:23 localhost kernel: tveeprom: ivtv version > > Nov 25 15:31:23 localhost kernel: tveeprom: Hauppauge: model = 23559, > > rev = D591 > > , serial# = 8027789 > > This is what the first tuner should have looked like. Not sure why > this line is missing from the first tuner. > > > Nov 25 15:31:23 localhost kernel: tveeprom: tuner = Philips FQ1216AME > > MK4 (idx = > > 91, type = 56) > > <snip> > > > > > > > > When i'm tuning the PVR to a channel (ivtvctl -d /dev/video0 -p 6 -r > > 216) and then cat /dev/video0 /tmp/video0.mpg this will only give > > noise > > and a little bit of the frequency i tuned on. > > Try this with the second tuner : use video1 instead of video0 and see > what results you get. You might also try other inputs instead of > just number 6 - I'm not sure which input is the tv tuner on your > model. If the second tuner works, you might have to get this on the > devel list. > > Keith C > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
