On Sunday 20 November 2005 12:43, Xenna wrote:
>
> OK, I tried the following things:
> - I removed the power leads from 2 of the 3 harddisks. (this left
> just the Matrox video the 2 Hauppauge cards and the 250 GB SATA
> disk): No difference.
> - I replaced the Matrox AGP videocard with the ASUS AGP videocard
> from my GF's PC: No difference.
> - I swapped the Hauppauge cards around: No difference.
>
> So on with the i2c debugging. The ic2-algo-bit module had a debug
> option so I tried that:
>
> $ modprobe i2c-algo-bit i2c_debug=2
> $ modprobe i2c-dev
> $ modprobe videodev
> $ modprobe i2c-via
>
> $ insmod /tmp/ivtv.ko ivtv_debug=33
>
> http://pastebin.ru/1000
>
> I'm busy downloading KnoppMyth R5A22. I'll try and see if I get the
> same symptoms when I boot from the KnoppMyth CD. If so, I intend to
> put the 2 PVR cards in my GF's PC and boot with KnoppMyth also. See
> if I get the same problem. If so, the problem must be either with the
> cards or the ivtv/i2c drivers (I think).

Any news on this?

        Hans

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to