--- Hans Verkuil <[EMAIL PROTECTED]> wrote:
> On Tuesday 06 December 2005 08:34, Steve Pugh wrote:
> > Google long enough, and you can find anything.
> >
> > I was getting no audio inside LiveTV in Myth, and
> no
> > audio when doing a "cat /dev/video2 > test2.mpg"
> (this
> > was my new PVR-150).
> >
> > I was, however, able to get audio when "cat"ing
> > dev/video0 and video1.
> >
> > Removing /lib/modules/HcwMakoA.ROM and rebooting
> did
> > the trick, everything looks great and more
> > importantly, it SOUNDS great. Hopefully there
> won't
> > be any adverse effects from its removal.
>
> Please mail your IVTV INIT sequence in the kernel
> log. Depending on the
> tuner type of the PVR150 it may be a known bug
> that's fixed in the
> upcoming 0.4.1.
As requested, here is the IVTV INIT chunk from dmesg -
I hope it helps! Thank you!
ivtv: ==================== START INIT IVTV
====================
ivtv: version 0.4.0 (tagged release) loading
ivtv: Linux version: 2.6.13.2-chw-3 SMP preempt 586
gcc-3.3
ivtv: In case of problems please include the debug
info
ivtv: between the START INIT IVTV and END INIT IVTV
lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv0: Autodetected WinTV PVR 350 card (iTVC15 based)
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level,
low) -> IRQ 18
ivtv0: Unreasonably low latency timer, setting to 64
(was 32)
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c
driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset),
addr=61]
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support,
simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Oct 9 2005 22:52:16
ivtv0: i2c attach to card #0 ok [client=MSP3448W-A2,
addr=40]
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver
#0)
ivtv0: i2c attach to card #0 ok [client=saa7115,
addr=21]
tveeprom: ivtv version
tveeprom: Hauppauge: model = 48132, rev = K268,
serial# = 2867016
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type =
47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
0x00001000)
tveeprom: audio processor = MSP4448 (type = 1b)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv0: i2c attach to card #0 ok [client=tveeprom,
addr=50]
saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver
#0)
ivtv0: i2c attach to card #0 ok [client=saa7127,
addr=44]
tda9885/6/7: (ivtv) chip found @ 0x86
ivtv0: i2c attach to card #0 ok [client=tda9887,
addr=43]
ivtv0: loading /lib/modules/ivtv-fw-enc.bin
ivtv0: loading /lib/modules/ivtv-fw-dec.bin
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536
buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048
buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 24 x 43200
buffers (1024KB total)
ivtv0: loading /lib/modules/ivtv_init_mpeg.bin
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv
i2c driver #0
ivtv0: Initialized WinTV PVR 350, card #0
ivtv: ====================== NEXT CARD
======================
ivtv1: Autodetected WinTV PVR 250 card (iTVC15 based)
ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 18 (level,
low) -> IRQ 16
ivtv1: Unreasonably low latency timer, setting to 64
(was 32)
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c
driver #1
ivtv1: i2c attach to card #1 ok [client=(tuner unset),
addr=61]
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support,
simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Oct 9 2005 22:52:16
ivtv1: i2c attach to card #1 ok [client=MSP3448W-A2,
addr=40]
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver
#1)
ivtv1: i2c attach to card #1 ok [client=saa7115,
addr=21]
tveeprom: ivtv version
tveeprom: Hauppauge: model = 48432, rev = I110,
serial# = 6143501
tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type =
2)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
0x00001000)
tveeprom: audio processor = MSP4448 (type = 1b)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv1: i2c attach to card #1 ok [client=tveeprom,
addr=50]
ivtv1: loading /lib/modules/ivtv-fw-enc.bin
ivtv1: loading /lib/modules/ivtv-fw-dec.bin
ivtv1: Encoder revision: 0x02050032
ivtv1: Decoder revision: 0x02020023
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and
compatibles)) by ivtv i2c driver #1
ivtv1: Initialized WinTV PVR 250, card #1
ivtv: ====================== NEXT CARD
======================
ivtv2: Autodetected WinTV PVR 250 card (iTVC16 based)
ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 20 (level,
low) -> IRQ 19
ivtv2: Unreasonably low latency timer, setting to 64
(was 32)
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c
driver #2
ivtv2: i2c attach to card #2 ok [client=(tuner unset),
addr=61]
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support,
simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Oct 9 2005 22:52:16
ivtv2: i2c attach to card #2 ok [client=MSP3448W-A2,
addr=40]
saa7115 3-0021: saa7115 found @ 0x42 (ivtv i2c driver
#2)
ivtv2: i2c attach to card #2 ok [client=saa7115,
addr=21]
tveeprom: ivtv version
tveeprom: Hauppauge: model = 32552, rev = C168,
serial# = 8059968
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type =
47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
0x00001000)
tveeprom: audio processor = MSP4448 (type = 1b)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv2: i2c attach to card #2 ok [client=tveeprom,
addr=50]
tda9885/6/7: (ivtv) chip found @ 0x86
ivtv2: i2c attach to card #2 ok [client=tda9887,
addr=43]
ivtv2: loading /lib/modules/ivtv-fw-enc.bin
ivtv2: Encoder revision: 0x02050032
ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
ivtv2: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
ivtv2: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
ivtv2: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
ivtv2: Create encoder radio stream
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv
i2c driver #2
ivtv2: Initialized WinTV PVR 250, card #2
ivtv: ==================== END INIT IVTV
====================
ivtv0-osd: Framebuffer module loaded (attached to ivtv
card id 0)
ivtv0-osd warning: Framebuffer is at decoder-relative
address 0x00510000 and has 1704960 bytes.
ivtv0-osd: screen coords: [0 0] -> [720 480]
ivtv0-osd: original global alpha = 208
ivtv0-osd: current OSD state = 39
ivtv0-osd: new global alpha = 208 (1 255 0)
ivtv0-osd: framebuffer at 0xf1510000, mapped to
0xe1f90000, size 1350k
ivtv0-osd: mode is 720x480x32, linelength=2880
ivtv0-osd: fb1: iTVC15 TV out frame buffer device
ivtv0: Allocate DMA decoder OSD stream: 16 x 65536
buffers (1024KB total)
__________________________________________
Yahoo! DSL Something to write home about.
Just $16.99/mo. or less.
dsl.yahoo.com
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
