On Thursday 08 December 2005 08:05 am, Joel Webb wrote: I executed the script in this other ivtv post, and got pretty far. http://houghi.org/script/pvr350
But I am trying to get a test signal and it is complaining that test_image=1 isn't part of the module. > On Wednesday 07 December 2005 11:46 pm, Joel Webb wrote: > > I am running SuSE 10.0 with the default drivers that came with suse for > ivtv. > > >From the documentation on the Internet, it looks like that it is supposed > > to > > be loading an image called ivtv-fw-enc.bin and ivtv-fw-dec.bin. However, > the default SuSE rpms don't have these. I did find however that in the rpm > it has a ivtv-api file, but that doesn't look like the driver. > > Below is the error that I am receiving at startup. > > > ivtv: module not supported by Novell, setting U taint flag. > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.3.7 (c) loading > ivtv: Linux version: 2.6.13-15.7-default 586 REGPARM gcc-4.0 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 350 card > ivtv: Found an iTVC15 based chip > ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 10 (level, low) > -> IRQ 10 > i2c-algo-bit.o: (0) scl=1, sda=1 > i2c-algo-bit.o: (1) scl=1, sda=0 > i2c-algo-bit.o: (2) scl=1, sda=1 > i2c-algo-bit.o: (3) scl=0, sda=1 > i2c-algo-bit.o: (4) scl=1, sda=1 > i2c-algo-bit.o: ivtv i2c driver #0 passed test. > ivtv: i2c attach [client=tveeprom,ok] > > : chip found @ 0xc2 (ivtv i2c driver #0) > > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > saa7115: detecting saa7115 client on address 0x42 > saa7115: writing init values > ivtv: i2c attach [client=saa7115[50],ok] > saa7115: status: (1E) 0x48, (1F) 0xc0 > saa7127: starting probe on adapter ivtv i2c driver #0 (0x10005) > saa7127: detecting saa7127 client on address 0x88 > saa7127: Selecting NTSC video Standard > saa7127: Selecting S-Video+Composite > saa7127: Turn WSS off > saa7127: Widescreen Mode 4:3 Full Format > saa7127: Selecting Normal Encoder Input > saa7127: Enable Video Output > ivtv: i2c attach [client=saa7127[50],ok] > msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio > mode=simpler ivtv: i2c attach [client=MSP3448W-A2,ok] > ivtv: i2c attach [client=unset,ok] > ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-1/1-0018/ir0 [ivtv i2c > driver #0] > msp34xxg: daemon started > tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 8207478 > tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > tveeprom: audio_processor = MSP3440 (type = 11) > ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model > 0x00ad2598, Revision 0xc56d9e80 > ivtv: NTSC tuner detected > ivtv: Radio detected > ivtv: requesting ivtv-fw-enc.bin from hotplug > ivtv: firmware load failed > ivtv: failed loading encoder firmware > ivtv: Error loading firmware -3! > ivtv: Error -3 initializing firmware. > ivtv: Error -12 on initialization > ivtv-iTVC15_16_mpg2_encoder_card: probe of 0000:00:0b.0 failed with error > -12 ivtv: ==================== END INIT IVTV ==================== -- Thanks Again, Joel Webb WebbGroup Property Management webbgroup.com 336-841-7241 _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
