On Thursday 08 December 2005 08:05 am, Joel Webb wrote:
Thanks guys,
I will try getting the firmware from the link below. However, isn't there a
simple SuSE rpm that I can install??
Al said that my version is out of date, but I also tried downloading the ivtv
drivers from the website and did the make, make install.
However the ivtv put all the drivers in /lib/modules/2.6.13-15.7-default/ivtv
instead of /lib/modules/2.6.13-15.7-default/extra and of course didn't come
with the ivtv-fw.bin files.
> On Wednesday 07 December 2005 11:46 pm, Joel Webb wrote:
>
> I am running SuSE 10.0 with the default drivers that came with suse for
> ivtv.
>
> >From the documentation on the Internet, it looks like that it is supposed
> > to
>
> be loading an image called ivtv-fw-enc.bin and ivtv-fw-dec.bin. However,
> the default SuSE rpms don't have these. I did find however that in the rpm
> it has a ivtv-api file, but that doesn't look like the driver.
>
> Below is the error that I am receiving at startup.
>
>
> ivtv: module not supported by Novell, setting U taint flag.
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.3.7 (c) loading
> ivtv: Linux version: 2.6.13-15.7-default 586 REGPARM gcc-4.0
> ivtv: In case of problems please include the debug info
> ivtv: between the START INIT IVTV and END INIT IVTV lines when
> ivtv: mailing the ivtv-devel mailinglist.
> ivtv: Autodetected WinTV PVR 350 card
> ivtv: Found an iTVC15 based chip
> ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 10 (level, low)
> -> IRQ 10
> i2c-algo-bit.o: (0) scl=1, sda=1
> i2c-algo-bit.o: (1) scl=1, sda=0
> i2c-algo-bit.o: (2) scl=1, sda=1
> i2c-algo-bit.o: (3) scl=0, sda=1
> i2c-algo-bit.o: (4) scl=1, sda=1
> i2c-algo-bit.o: ivtv i2c driver #0 passed test.
> ivtv: i2c attach [client=tveeprom,ok]
>
> : chip found @ 0xc2 (ivtv i2c driver #0)
>
> ivtv: i2c attach [client=(tuner unset),ok]
> saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
> saa7115: detecting saa7115 client on address 0x42
> saa7115: writing init values
> ivtv: i2c attach [client=saa7115[50],ok]
> saa7115: status: (1E) 0x48, (1F) 0xc0
> saa7127: starting probe on adapter ivtv i2c driver #0 (0x10005)
> saa7127: detecting saa7127 client on address 0x88
> saa7127: Selecting NTSC video Standard
> saa7127: Selecting S-Video+Composite
> saa7127: Turn WSS off
> saa7127: Widescreen Mode 4:3 Full Format
> saa7127: Selecting Normal Encoder Input
> saa7127: Enable Video Output
> ivtv: i2c attach [client=saa7127[50],ok]
> msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio
> mode=simpler ivtv: i2c attach [client=MSP3448W-A2,ok]
> ivtv: i2c attach [client=unset,ok]
> ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-1/1-0018/ir0 [ivtv i2c
> driver #0]
> msp34xxg: daemon started
> tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 8207478
> tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio_processor = MSP3440 (type = 11)
> ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model
> 0x00ad2598, Revision 0xc56d9e80
> ivtv: NTSC tuner detected
> ivtv: Radio detected
> ivtv: requesting ivtv-fw-enc.bin from hotplug
> ivtv: firmware load failed
> ivtv: failed loading encoder firmware
> ivtv: Error loading firmware -3!
> ivtv: Error -3 initializing firmware.
> ivtv: Error -12 on initialization
> ivtv-iTVC15_16_mpg2_encoder_card: probe of 0000:00:0b.0 failed with error
> -12 ivtv: ==================== END INIT IVTV ====================
--
Thanks Again,
Joel Webb
President and CEO
PropBot.com L.L.C.
Home of:
PropBot.com
TheCreativeInvestor.com
AllYouCanRent.com
SellAnyHouseQuick.com
703-778-5755 x101
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
