Hello,
This is my first look at ivtv so I might be missing something obvious.
ivtv seems to be installed correctly, ivtv-detect gives me:
driver: ivtv-0.4.1 (tagged release)
card: WinTV PVR 350, bus info 0000:02:0e.0, ivtv card #0
hardware: saa7115 saa7127 msp34xx tda9887 tveeprom
/dev/video0: MPG encoding (links: /dev/video)
/dev/radio0: Radio (links: /dev/radio)
/dev/vbi0: VBI encoding (links: /dev/vbi)
/dev/vbi4: VBI from MPG
/dev/vbi8: VBI decoding
/dev/video16: MPG decoding
/dev/video24: PCM encoding
/dev/video32: YUV encoding
/dev/video48: YUV decoding
I have a TV connected to the board via the SCART connector.
I would like to play TV from the PVT350 and use the PC to change
channels. I have set passthorough (ivtvctl -K 1) and the TV shows a
blankscreen. The question is, what do I do next? I have tried ivtv-tune
in various combinations (e.g. ivtv-tune -teurope-west -cE1) but don't
get a picture. What am I doing wrong?
TIA.
--
Ian Leonard
Please ignore spelling and punctuation - I did.
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
