I am not sure about the sound but the best app I have seen for ivtv cards is mythtv. John
--- Des Dougan <[EMAIL PROTECTED]> wrote: > I've installed a new WinTV-PVR 150 card in my AMD > Sempron system > (running SuSE 10.0 in 32-bit mode). I've followed > (and re-checked) the > How-to, and gone through the Troubleshooting > section, too. However, I > still have 2 issues - no sound, and while I can see > video output using > the "cat /dev/video > test.mpg" test, when I run any > of the TV programs > (KDETV, XAWTV, TVTime or Zapping TV Viewer) on my > system, I can't get > any of them to run correctly - TVTime, for example, > says, simply, "No > signal", while KDETV hangs, with the following in > the terminal: > > > [EMAIL PROTECTED]:~> kdetv > ALSA lib control.c:817:(snd_ctl_open_noupdate) > Invalid CTL > kdetv: WARNING: Device does not support streaming > interface or is not a V4L2 device. > kdetv: WARNING: Device does not support streaming > interface or is not a V4L2 device. > kdetv: WARNING: KXvDevice::init(): Unable to grab Xv > port. > kdetv: WARNING: KXvDevice::init(): Unable to grab Xv > port. > Creating vbi proxy client, rev. > $Id: proxy-client.c,v 1.9 2005/01/20 20:56:11 > mschimek Exp $ > proxy_msg: connect: error 2, No such file or > directory > kdetv: WARNING: VBIDecoder: vbi_capture_proxy_new > error: Connection via socket failed, server not > running. > Try to open V4L2 0.20 VBI device, libzvbi interface > rev. > $Id: io-v4l2.c,v 1.31 2004/12/30 02:24:11 mschimek > Exp $ > Opened /dev/vbi > Try to open V4L2 2.6 VBI device, libzvbi interface > rev. > $Id: io-v4l2k.c,v 1.28 2005/05/25 02:26:41 > mschimek Exp $ > Opened /dev/vbi > /dev/vbi (WinTV PVR 150) is a v4l2 vbi device, > driver ivtv, version 0x00000401 > Using read interface > Current scanning system is 525 > Querying current vbi parameters... success > VBI capture parameters supported: format 59455247 > [GREY], 27000000 Hz, 1440 bpl, offs 248, F1 10...21, > F2 273...284, flags 00000000 > VBI capture parameters granted: format 59455247 > [GREY], 27000000 Hz, 1440 bpl, offs 248, F1 10...21, > F2 273...284, flags 00000000 > Nyquist check passed > Request decoding of services 0x60000c7f, strict > level -1 > Will capture services 0x00000060, added 0x60 > commit:1 > Capture buffer allocated > Successful opened /dev/vbi (WinTV PVR 150) > kdetv: WARNING: MainWindow::setupInfraRed(): Lirc > not available > kdetv: WARNING: KXvDevice::init(): Unable to grab Xv > port. > kdetv: WARNING: KXvDevice::init(): Unable to grab Xv > port. > kdetv: WARNING: ... failed. kdetv likely does not to > work with your device and/or your current filter > config. > > The system log looks like the modules are loading: > > Dec 28 21:14:17 sempron kernel: ivtv: > ==================== START INIT IVTV > ==================== > Dec 28 21:14:17 sempron kernel: ivtv: version 0.4.1 > (tagged release) loading > Dec 28 21:14:17 sempron kernel: ivtv: Linux > version: 2.6.13-15.7-default 586 REGPARM gcc-4.0 > Dec 28 21:14:17 sempron kernel: ivtv: In case of > problems please include the debug info between > Dec 28 21:14:17 sempron kernel: ivtv: the START > INIT IVTV and END INIT IVTV lines, along with > Dec 28 21:14:17 sempron kernel: ivtv: any module > options, when mailing the ivtv-users mailinglist. > Dec 28 21:14:17 sempron kernel: ivtv0: Autodetected > WinTV PVR 150 card (cx23416 based) > Dec 28 21:14:17 sempron kernel: ACPI: PCI Interrupt > 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, > low) -> IRQ 11 > Dec 28 21:14:17 sempron kernel: i2c-algo-bit.o: (0) > scl=1, sda=1 > Dec 28 21:14:17 sempron kernel: i2c-algo-bit.o: (1) > scl=1, sda=0 > Dec 28 21:14:17 sempron kernel: i2c-algo-bit.o: (2) > scl=1, sda=1 > Dec 28 21:14:17 sempron kernel: i2c-algo-bit.o: (3) > scl=0, sda=1 > Dec 28 21:14:17 sempron kernel: i2c-algo-bit.o: (4) > scl=1, sda=1 > Dec 28 21:14:17 sempron kernel: i2c-algo-bit.o: ivtv > i2c driver #0 passed test. > Dec 28 21:14:17 sempron kernel: tveeprom: module not > supported by Novell, setting U taint flag. > Dec 28 21:14:17 sempron kernel: tveeprom: ivtv > version > Dec 28 21:14:17 sempron kernel: tveeprom: Hauppauge: > model = 26032, rev = C199, serial# = 8226463 > Dec 28 21:14:17 sempron kernel: tveeprom: tuner = > TCL 2002N 5H (idx = 99, type = 50) > Dec 28 21:14:17 sempron kernel: tveeprom: tuner fmt > = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > Dec 28 21:14:17 sempron kernel: tveeprom: audio > processor = CX25841 (type = 23) > Dec 28 21:14:17 sempron kernel: tveeprom: decoder > processor = CX25841 (type = 1c) > Dec 28 21:14:17 sempron kernel: ivtv0: i2c attach to > card #0 ok [client=tveeprom, addr=50] > Dec 28 21:14:17 sempron kernel: tuner: module not > supported by Novell, setting U taint flag. > Dec 28 21:14:17 sempron kernel: tuner (ivtv): chip > found at addr 0xc2 i2c-bus ivtv i2c driver #0 > Dec 28 21:14:17 sempron kernel: ivtv0: i2c attach to > card #0 ok [client=(tuner unset), addr=61] > Dec 28 21:14:17 sempron kernel: cx25840: module not > supported by Novell, setting U taint flag. > Dec 28 21:14:17 sempron kernel: cx25840 0-0044: ivtv > driver > Dec 28 21:14:17 sempron kernel: cx25840 0-0044: > cx25841-23 found @ 0x88 (ivtv i2c driver #0) > Dec 28 21:14:19 sempron kernel: cx25840 0-0044: > loaded v4l-cx25840.fw firmware (14264 bytes) > Dec 28 21:14:19 sempron kernel: ivtv0: i2c attach to > card #0 ok [client=cx25840, addr=44] > Dec 28 21:14:19 sempron kernel: wm8775: module not > supported by Novell, setting U taint flag. > Dec 28 21:14:19 sempron kernel: wm8775 0-001b: ivtv > driver > Dec 28 21:14:19 sempron kernel: wm8775 0-001b: chip > found @ 0x36 (ivtv i2c driver #0) > Dec 28 21:14:19 sempron kernel: ivtv0: i2c attach to > card #0 ok [client=wm8775, addr=1b] > Dec 28 21:14:19 sempron kernel: tda9887: module not > supported by Novell, setting U taint flag. > Dec 28 21:14:19 sempron kernel: ivtv0: loaded > v4l-cx2341x-enc.fw firmware (262144 bytes) > Dec 28 21:14:19 sempron kernel: ivtv0: Encoder > revision: 0x02050032 > Dec 28 21:14:19 sempron kernel: ivtv0: Allocate DMA > encoder MPEG stream: 128 x 32768 buffers (4096KB > total) > Dec 28 21:14:19 sempron kernel: ivtv0: Allocate DMA > encoder YUV stream: 194 x 10800 buffers (2048KB > total) > Dec 28 21:14:19 sempron kernel: ivtv0: Allocate DMA > encoder VBI stream: 120 x 17472 buffers (2048KB > total) > Dec 28 21:14:19 sempron kernel: ivtv0: Allocate DMA > encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > Dec 28 21:14:20 sempron kernel: tuner: type set to > 50 (TCL 2002N) by ivtv i2c driver #0 > Dec 28 21:14:20 sempron kernel: ivtv0: Initialized > WinTV PVR 150, card #0 > Dec 28 21:14:20 sempron kernel: ivtv: > ==================== END INIT IVTV > ==================== > > lspci provides the following: > > 00:09.0 Multimedia video controller: Internext > Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev > 01) > > "ivtvctl -a" provides the following: > > [EMAIL PROTECTED]:~> ivtvctl -a > ioctl IVTV_IOC_G_CODEC ok > Codec parameters > aspect : 2 > audio : 0x00e9 > bframes : 3 > bitrate_mode: 0 > bitrate : 8000000 > bitrate_peak: 9600000 > dnr_mode : 0 > dnr_spatial : 0 > dnr_temporal: 8 > dnr_type : 0 > framerate : 0 > framespergop: 15 > gop_closure : 1 > pulldown : 0 > stream_type : 14 > ioctl VIDIOC_G_FMT ok > Type : Video Capture > === message truncated === _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
