Hi Hans,
Thanks for your reply.
On Fri, 2005-12-30 at 11:14 +0100, Hans Verkuil wrote:
> On Thursday 29 December 2005 23:47, Des Dougan wrote:
> > On Thu, 2005-12-29 at 13:31 +0100, dewag wrote:
> > > did you already try the command:
> > >
> > > mplayer /dev/video0
> > >
> > > It should show the current channel of the television tuner.
> > > Do not forget to use:
> > >
> > > ivtv-tune -cXX
> > >
> > > where XX is the wanted channel number.
> > >
> > > Peter
> >
> > Peter,
> >
> > Thanks for your reply. I tried mplayer as suggested, with similar
> > results. In checking further, I found that the msp3400, saa7115 and
> > saa7127 modules are not being loaded.
>
> These modules are for the PVR250/350 and are not used by the PVR150.
Ah, OK.
> Looking at the log you posted earlier it looks like you might not be
> using the correct tda9887 module. Look in /lib/modules if there are
> other copies lying around and rename them so they aren't loaded. Only
> the ivtv version should be used. You should see a message like:
>
> tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
>
> (note the 'ivtv' string).
I've double-checked this, and the module loading is the one compiled
from the ivtv tarball (0.4.1).
Would recompiling be the next step you'd suggest?
Thanks,
Des
--
Des Dougan, Principal
Dougan Consulting Group
Ph: 604-980-2848 Email: des at DouganConsulting dot com
www.DouganConsulting.com
Design - Implementation - Support
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
