Thank for the relpy I got it work I don't know what was wrong but went to 
work and came to try get to work just try enter it agian and it worked.
thanks
Shawn


>From: Des Dougan <[EMAIL PROTECTED]>
>Reply-To: User discussion about IVTV <[email protected]>
>To: [email protected]
>Subject: Re: [ivtv-users] help setting up Hauppauge PVR-250
>Date: Fri, 30 Dec 2005 09:26:05 -0800
>
>On Mon, 2005-12-26 at 22:48 -0700, Crazyguy78 Anderton wrote:
> > I am use the tutorial http://wilsonet.com/mythtv/fcmyth.php#getmythtv 
>and
> > try to setup my Hauppauge PVR-250  get to the point here were need to 
>enter
> >
> > /usr/bin/ivtvctl -u 0x3000  and when I enter it say's not an ivtv driver
> > device what I am I doing wrong.
>
>I had this earlier this week when working on getting my card installed.
>It turned out there were previous module versions in a different
>location. Do a find for ivtv.ko and check date and timestamps.
>
>Regards,
>
>Des
>
> > vtv:  ==================== START INIT IVTV ====================
> > ivtv:  version 0.4.1 (tagged release) loading
> > ivtv:  Linux version: 2.6.14-1.1653_FC4 686 REGPARM 4KSTACKS gcc-4.0
> > ivtv:  In case of problems please include the debug info between
> > ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
> > ivtv:  any module options, when mailing the ivtv-users mailinglist.
> > ivtv0: Autodetected WinTV PVR 250 card (cx23416 based)
> > ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKB] -> GSI 10 (level, 
>low) ->
> > IRQ 10
> > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> > tveeprom 2-0050: Hauppauge model 32032, rev B310, serial# 6983299
> > tveeprom 2-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2)
> > tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
> > tveeprom 2-0050: audio processor is MSP4448 (idx 27)
> > tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
> > tveeprom 2-0050: has no radio, has IR remote
> > saa7115 2-0021: ivtv driver
> > saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
> > ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
> > msp3400 2-0040: ivtv driver
> > msp3400 2-0040: chip=MSP4448G-A2 +nicam +simple +simpler +radio 
>mode=simpler
> > ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40]
> > msp3400 2-0040: msp34xxg daemon started
> > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > ivtv0: Encoder revision: 0x02040024
> > ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or
> > 0x02050032.
> > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB 
>total)
> > ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB 
>total)
> > ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB 
>total)
> > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
> > total)
> > tuner 2-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and 
>compatibles))
> > ivtv0: Initialized WinTV PVR 250, card #0
> > ivtv:  ====================  END INIT IVTV  ====================
> >
> > 00:0c.0 Multimedia video controller: Internext Compression Inc iTVC16
> > (CX23416) MPEG-2 Encoder (rev 01)
> >         Subsystem: Hauppauge computer works Inc. WinTV PVR 250
> >         Flags: bus master, medium devsel, latency 64, IRQ 10
> >         Memory at e4000000 (32-bit, prefetchable) [size=64M]
> >         Capabilities: [44] Power Management version 2
> > thanks
> > [EMAIL PROTECTED]
> >
> >
> >
> > _______________________________________________
> > ivtv-users mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
>--
>
>Des Dougan, Principal
>Dougan Consulting Group
>
>Ph: 604-980-2848       Email: des at DouganConsulting dot com
>
>         www.DouganConsulting.com
>
>Design - Implementation - Support
>
>
>_______________________________________________
>ivtv-users mailing list
>[email protected]
>http://ivtvdriver.org/mailman/listinfo/ivtv-users



_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to