ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.1 (tagged release) loading
ivtv: Linux version: 2.6.14-1.1653_FC4 686 REGPARM 4KSTACKS gcc-4.0
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
PCI: Found IRQ 10 for device 0000:00:12.0
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: ivtv version
tveeprom: Hauppauge: model = 26552, rev = B268, serial# = 7826786
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840: Unknown parameter `cardtype'
ivtv0: Failed to load module cx25840
ivtv0 warning: i2c client addr: 0x44 not found for command 0xc008561c!
wm8775 0-001b: ivtv driver
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
tda9885/6/7: chip found @ 0x86
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02040024
ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x02050032.
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0
ivtv0 warning: i2c client addr: 0x44 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x44 not found for command 0xc0045627!
ivtv0 warning: i2c client addr: 0x44 not found for command 0x40046d11!
ivtv0 warning: i2c client addr: 0x44 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x44 not found for command 0xc008561c!
ivtv0 warning: i2c client addr: 0x44 not found for command 0x40045613!
ivtv0 warning: i2c client addr: 0x44 not found for command 0x402c5639!
ivtv0 warning: i2c client addr: 0x44 not found for command 0x40045612!
ivtv0 warning: i2c client addr: 0x44 not found for command 0xc008561c!
ivtv0: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
It doesn't seem to load the driver for cx25840.......I assume this is my sound problem. I've tried to load the appropriate modules into /lib/modules and recently I've found a posting showing they should be loaded into /lib/firmware. I've tried it with the following drivers HcwMako(A/B/C).ROM and have copied this to v4l.cx25840.fw in both directories.
I can't seem to track this one down. Any ideas??
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
