Dear experts !, I tried kazilion times different howtow to extract the firmwares, placed them in all directories, but I cannot seem to get them loading.
I am running debian 2.6.8-2-386 I added drivers to blacklist : disable loading : pico /etc/hotplug/blacklist - shpchp - pciehp Because they were not loading. But that did not solve it either. Please advice... I am working on this and surfing the net, reading news etc for almost a week now... And I am getting frustrated.... Any suggestions ? (besides "not to get frustrated ) I have not set any module options (as I am aware of) Sincerely Rob ivtv0: unable to open firmware v4l-cx2341x-enc.fw ziggy:/usr/lib/hotplug/firmware# ls -l total 1024 -rwxrwxrwx 1 root root 262144 Jan 3 19:49 ivtv-fw-dec.bin -rwxrwxrwx 1 root root 262144 Jan 3 19:49 ivtv-fw-enc.bin -rwxrwxrwx 1 root root 262144 Jan 3 19:49 v4l-cx2341x-dec.fw -rwxrwxrwx 1 root root 262144 Jan 3 19:49 v4l-cx2341x-enc.fw ziggy:/usr/lib/hotplug/firmware# ziggy:/lib/firmware# ls -l total 1024 -rwxrwxrwx 1 root root 262144 Jan 3 19:52 ivtv-fw-dec.bin -rwxrwxrwx 1 root root 262144 Jan 3 19:52 ivtv-fw-enc.bin -rwxrwxrwx 1 root root 262144 Jan 3 19:52 v4l-cx2341x-dec.fw -rwxrwxrwx 1 root root 262144 Jan 3 19:52 v4l-cx2341x-enc.fw ziggy:/lib/firmware# ziggy:/lib/modules# ls -l total 1025 drwxrwxrwx 6 root root 560 Jan 3 19:46 2.6.8-2-386 -rwxrwxrwx 1 root root 262144 Jan 3 19:49 ivtv-fw-dec.bin -rwxrwxrwx 1 root root 262144 Jan 3 19:49 ivtv-fw-enc.bin -rwxrwxrwx 1 root root 262144 Jan 3 19:49 v4l-cx2341x-dec.fw -rwxrwxrwx 1 root root 262144 Jan 3 19:49 v4l-cx2341x-enc.fw ziggy:/lib/modules# Jan 3 19:54:34 ziggy kernel: ivtv: ==================== START INIT IVTV ==================== Jan 3 19:54:34 ziggy kernel: ivtv: version 0.4.1 (tagged release) loading Jan 3 19:54:34 ziggy kernel: ivtv: Linux version: 2.6.8-2-386 preempt 386 gcc-3.3 Jan 3 19:54:34 ziggy kernel: ivtv: In case of problems please include the debug info between Jan 3 19:54:34 ziggy kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with Jan 3 19:54:34 ziggy kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. Jan 3 19:54:34 ziggy kernel: ivtv0: Autodetected WinTV PVR 350 card (cx23415 based) Jan 3 19:54:34 ziggy kernel: ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 185 Jan 3 19:54:34 ziggy kernel: tveeprom: ivtv version Jan 3 19:54:34 ziggy kernel: tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7980217 Jan 3 19:54:34 ziggy kernel: tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) Jan 3 19:54:34 ziggy kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Jan 3 19:54:34 ziggy kernel: tveeprom: audio processor = MSP4418 (type = 19) Jan 3 19:54:34 ziggy kernel: tveeprom: decoder processor = SAA7115 (type = 13) Jan 3 19:54:34 ziggy kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] Jan 3 19:54:34 ziggy kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Jan 3 19:54:34 ziggy kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] Jan 3 19:54:34 ziggy kernel: saa7115 0-0021: ivtv driver Jan 3 19:54:34 ziggy kernel: saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) Jan 3 19:54:34 ziggy kernel: ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] Jan 3 19:54:34 ziggy kernel: saa7127 0-0044: ivtv driver Jan 3 19:54:34 ziggy kernel: saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) Jan 3 19:54:34 ziggy kernel: ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] Jan 3 19:54:34 ziggy kernel: msp34xx: init: chip=MSP3418W-B3 +nicam +simple +radio Jan 3 19:54:34 ziggy kernel: msp3410: daemon started Jan 3 19:54:34 ziggy kernel: ivtv0: i2c attach to card #0 ok [client=MSP3418W-B3, addr=40] Jan 3 19:54:34 ziggy kernel: tda9885/6/7: chip found @ 0x86 Jan 3 19:54:34 ziggy kernel: ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] Jan 3 19:54:45 ziggy kernel: ivtv0: unable to open firmware v4l-cx2341x-enc.fw Jan 3 19:54:45 ziggy kernel: ivtv0: did you put the firmware in the hotplug firmware directory? Jan 3 19:54:45 ziggy kernel: ivtv0 warning: failed loading encoder firmware Jan 3 19:54:45 ziggy kernel: ivtv0 warning: Error loading firmware -3! Jan 3 19:54:45 ziggy kernel: ivtv: probe of 0000:02:09.0 failed with error -12 Jan 3 19:54:45 ziggy kernel: ivtv: ==================== END INIT IVTV ==================== _____ This line is added to all our mails, when absent the email does not originate from us, and probably contains a virus. _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
