type 'ivtvctl -Y' and look if Mute = yes
[EMAIL PROTECTED] escribió:
[EMAIL PROTECTED] escribió:
I'm running SUSE 10 (x86_64) kernel 2.6.13-7 (default
kernel).
Suse 10 comes with ivtv 0.3.7, but I decided to go with
0.4.1 as 0.3.7 didn't have any sound coming from the
tuner, only line in.
So, I upgraded to 0.4.1 and everything seemed to be
working fine, both composite+line in and the tuner.
Then I noticed that after I had tuned into any one
station, the sound from that station bled into the line in
when I used the composite input.
There seems to be no way to get rid of this. I tried every
setting I could think of in ivtvctl, to force the audio
input, but the audio input says "Line in", so that doesn't
help.
If I reload the kernel modules, then everything is fine
until I tune into a station.
Any ideas?
I have 0.4.2 running at the moment.
ACPI: PCI interrupt for device 0000:00:05.0 disabled
ivtv0: Removed WinTV PVR 150, card #0
tveeprom: module not supported by Novell, setting U taint
flag.
cx25840: module not supported by Novell, setting U taint
flag.
tuner: module not supported by Novell, setting U taint
flag.
wm8775: module not supported by Novell, setting U taint
flag.
ivtv: module not supported by Novell, setting U taint
flag.
ivtv: ==================== START INIT IVTV
====================
ivtv: version 0.4.2 (development revision 3098) loading
ivtv: Linux version: 2.6.13-15.7-smp SMP gcc-4.0
ivtv: In case of problems please include the debug info
between
ivtv: the START INIT IVTV and END INIT IVTV lines, along
with
ivtv: any module options, when mailing the ivtv-users
mailinglist.
ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low)
-> IRQ 185
tveeprom: ivtv version
tveeprom: Hauppauge: model = 26559, rev = C260, serial# =
7627545
tveeprom: tuner = LG S001D MK3 (idx = 60, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K)
(eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
cx25840 debug 1-0044: detecting cx25840 client on address
0x88
cx25840 1-0044: ivtv driver
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver
#0)
zaphfc: empty HDLC frame or bad CRC received (framelen =
5, stat = 0xff, card = 0).
cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264
bytes)
cx25840 debug 1-0044: decoder set input (0)
cx25840 debug 1-0044: now setting Tuner input
cx25840 debug 1-0044: set audio input (0)
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c
driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset),
addr=61]
ivtv0: i2c attach to card #0 ok [client=wm8775[50],
addr=1b]
cx25840 debug 1-0044: decoder set input (0)
cx25840 debug 1-0044: now setting Tuner input
tda9887: module not supported by Novell, setting U taint
flag.
tda9887 1-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver
#0)
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
zaphfc: empty HDLC frame or bad CRC received (framelen =
4, stat = 0xff, card = 0).
ivtv0: Encoder revision: 0x02040011
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960
buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers
(2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608
buffers (2048KB total)
ivtv0: Create encoder radio stream
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME
MK3)) by ivtv i2c driver #0
cx25840 debug 1-0044: decoder set input (0)
cx25840 debug 1-0044: now setting Tuner input
cx25840 debug 1-0044: set audio input (0)
tuner: switching to v4l2
insmod fixup: PAL => PAL-BG
cx25840 debug 1-0044: disable output
tuner: tv freq set to 400.00
tuner: tv 0x1b 0x6f 0x8e 0x02
cx25840 debug 1-0044: enable output
ivtv0: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV
====================
cx25840 debug 1-0044: disable output
cx25840 debug 1-0044: decoder set input (1)
cx25840 debug 1-0044: now setting Composite input
cx25840 debug 1-0044: set audio input (6)
cx25840 debug 1-0044: enable output
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
Correo Yahoo!
Comprueba qué es nuevo, aquí
http://correo.yahoo.es
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
