On Wednesday 11 January 2006 02:56, [EMAIL PROTECTED] wrote:
> I'm new to this. I'm looking for some help in diagnosing why my
> Hauppauge WinTV-PVR-150 card produces a zero length file when I use
> the command:
>
> cat /dev/video0 > /tmp/test_capture.mpg
>
> I followed the instructions at http://wilsonet.com/mythtv/fcmyth.php
Can someone please update these instructions for 0.4.1? Please let it
point to the correct ivtvdriver.org pages and mailinglist and remove
the module options that are no longer needed. The same for the
unnecessary ivtvctl commands.
Hans
> for seting up the ivtv driver and MythTV software. All appeared to go
> OK. After step 10 (install capture card driver), I tested the video
> capture by attaching an antenna to the NTSC input of my PVT-150 and
> used the above unix command.
>
> I used "ivtv-tune -c 8" to set the tuner to a strong local TV
> channel. I tried the following commands to insure the card used the
> proper video input: /usr/bin/ivtvctl -u 0x3000
> /usr/bin/ivtvctl -p 4 (I tried 0 thru 8, not just 4)
>
> At the end of this email are the relevant system log entries when
> booting. Notice the system autodetects a WinTV PVR 250 card, but I
> have a PVR-150.
>
> Perhaps I have incorrect firmware?
> My /lib/modules directory contains the following files:
>
> -rwxr-xr-x 1 root root 13353 Oct 2 2004 HcwMakoA.ROM
> -rw-r--r-- 1 root root 262144 Dec 25 04:56 ivtv-fw-dec.bin
> -rw-r--r-- 1 root root 262144 Dec 25 04:56 ivtv-fw-enc.bin
> lrwxrwxrwx 1 root root 15 Jan 6 01:22 v4l-cx2341x-dec.fw ->
> ivtv-fw-dec.bin lrwxrwxrwx 1 root root 15 Jan 6 01:22
> v4l-cx2341x-enc.fw -> ivtv-fw-enc.bin -rwxr-xr-x 1 root root 155648
> Nov 15 14:27 v4l-cx2341x-init-mpeg.bin lrwxrwxrwx 1 root root 12
> Jan 6 23:04 v4l-cx25840.fw -> HcwMakoA.ROM
>
>
> ---------------------------------------------------------------------
>---
>
>
> kernel: ivtv: ==================== START INIT IVTV
> ==================== kernel: ivtv: version 0.4.1 (tagged release)
> loading
> kernel: ivtv: Linux version: 2.6.14-1.1653_FC4smp SMP 686 REGPARM
> 4KSTACKS gcc-4.0 kernel: ivtv: In case of problems please include
> the debug info between kernel: ivtv: the START INIT IVTV and END
> INIT IVTV lines, along with kernel: ivtv: any module options, when
> mailing the ivtv-users mailinglist. kernel: ivtv0: Autodetected WinTV
> PVR 250 card (cx23416 based) kernel: ACPI: PCI Interrupt
> 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 193 kernel: ivtv0:
> Unreasonably low latency timer, setting to 64 (was 32) kernel:
> tveeprom: ivtv version
> kernel: tveeprom: Hauppauge: model = 26032, rev = C199, serial# =
> 8226087 kernel: tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50)
> kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
> 0x00001000) kernel: tveeprom: audio processor = CX25841 (type = 23)
> kernel: tveeprom: decoder processor = CX25841 (type = 1c)
> kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> kernel: tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver
> #0 kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset),
> addr=61] kernel: ivtv0 warning: i2c client addr: 0x21 not found for
> command 0x8004646b! kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware
> (262144 bytes) kernel: ivtv0: Encoder revision: 0x02040024
> kernel: ivtv0 warning: Encoder Firmware can be buggy, use version
> 0x02040011 or 0x02050032. kernel: ivtv0: Allocate DMA encoder MPEG
> stream: 128 x 32768 buffers (4096KB total) kernel: ivtv0: Allocate
> DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) kernel:
> ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB
> total) kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x
> 4608 buffers (2048KB total) kernel: tuner: type set to 50 (TCL 2002N)
> by ivtv i2c driver #0 kernel: ivtv0 warning: i2c client addr: 0x21
> not found for command 0x40085618! kernel: ivtv0 warning: i2c client
> addr: 0x21 not found for command 0xc0045627! kernel: ivtv0 warning:
> i2c client addr: 0x40 not found for command 0x40086d11! kernel: ivtv0
> warning: i2c client addr: 0x40 not found for command 0x80287610!
> kernel: ivtv0 warning: i2c client addr: 0x40 not found for command
> 0x40287611! fstab-sync[2285]: removed all generated mount points
> kernel: ivtv0 warning: i2c client addr: 0x40 not found for command
> 0x40085618! kernel: ivtv0 warning: i2c client addr: 0x21 not found
> for command 0x40085618! kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x80287610! kernel: ivtv0 warning: i2c client
> addr: 0x40 not found for command 0x40287611! kernel: ivtv0 warning:
> i2c client addr: 0x21 not found for command 0x40045613! kernel: ivtv0
> warning: i2c client addr: 0x40 not found for command 0x402c5639!
> kernel: ivtv0 warning: i2c client addr: 0x21 not found for command
> 0x40045612! kernel: ivtv0 warning: i2c client addr: 0x40 not found
> for command 0x80287610! kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x40287611! kernel: ivtv0: Initialized WinTV
> PVR 250, card #0
> kernel: ivtv: ==================== END INIT IVTV
> ====================
>
>
> Griff
> [EMAIL PROTECTED]
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
