Hello,
I could not get the tuner to work on my PVR 350.
I have done everything per instruction.
Following is the dmesg extract.
Hardware:
PVR 350
AMD Anthlon PC
Software:
Suse 10.0
ivtv driver 0.4.1
mythtv 0.18.2
--
cat /dev/video0 >test.mpg produces some lines and
spots. I tried different channels but no luck.
I have removed all the modules of ivtv came with the
os. But still seeing the message "ivtv:module not
supported by Novell, setting U taint flag"
I am stuck here. Your help is highly appreciated.
ivtv: module not supported by Novell, setting U taint
flag.
ivtv: ==================== START INIT IVTV
====================
ivtv: version 0.4.1 (tagged release) loading
ivtv: Linux version: 2.6.13-15-default 586 REGPARM
gcc-4.0
ivtv: In case of problems please include the debug
info between
ivtv: the START INIT IVTV and END INIT IVTV lines,
along with
ivtv: any module options, when mailing the ivtv-users
mailinglist.
ivtv0: Autodetected WinTV PVR 350 card (cx23415 based)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] ->
GSI 11 (level,
low) ->
IRQ 11
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: ivtv i2c driver #0 passed test.
tveeprom: module not supported by Novell, setting U
taint flag.
tveeprom: ivtv version
tveeprom: Hauppauge: model = 48132, rev = K268,
serial# = 7876114
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type =
47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
0x00001000)
tveeprom: audio processor = MSP4448 (type = 1b)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv0: i2c attach to card #0 ok [client=tveeprom,
addr=50]
tuner: module not supported by Novell, setting U taint
flag.
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c
driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset),
addr=61]
saa7115: module not supported by Novell, setting U
taint flag.
saa7115 0-0021: ivtv driver
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver
#0)
ivtv0: i2c attach to card #0 ok [client=saa7115,
addr=21]
saa7127: module not supported by Novell, setting U
taint flag.
saa7127 0-0044: ivtv driver
saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver
#0)
ivtv0: i2c attach to card #0 ok [client=saa7127,
addr=44]
msp3400: module not supported by Novell, setting U
taint flag.
msp3400 0-0040: ivtv driver
msp3400 0-0040: chip=MSP4448G-A2 +nicam +simple
+simpler +radio
mode=simpler
ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2,
addr=40]
msp3400 0-0040: msp34xxg daemon started
tda9887: module not supported by Novell, setting U
taint flag.
tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c
driver #0)
ivtv0: i2c attach to card #0 ok [client=tda9887,
addr=43]
ACPI-0212: *** Warning: Device is not power
manageable
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] ->
GSI 10 (level,
low) ->
IRQ 10
PCI: Setting latency timer of device 0000:00:07.5 to
64
bootsplash: status on console 0 changed to on
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144
bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144
bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB
total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB
total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB
total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers
(2048KB
total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536
buffers (1024KB
total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048
buffers (1024KB
total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 24 x 43200
buffers (1024KB
total)
ivtv0: loaded v4l-cx2341x-init-mpeg.bin firmware
(155648 bytes)
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv
i2c driver #0
ivtv0: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
