In drivers/Kbuild remove the 'NO_SUP_MODULES :=' line and compile &
install again. This will be fixed in the upcoming 0.4.2 release.
Hans
On Sunday 15 January 2006 16:55, kasper markus wrote:
> Hi everyone,
>
> After purchasing a Hauppauge prv-500 mce-kit a week ago or so, i've
> been fighting to getting it to work on my debian box, I have been
> googling and tried everything i could find that might get it to work,
> but now i give up... I lost the fight and decided to ask for help on
> this list.
>
> As mentioned my card is a pvr-500 mce (kit). I run debian on my
> computer, which is an AMD64 2GHz, with an ASROCK dual-sata2
> motherboard. I've compiled my own kernel 2.6.15.
>
> I decided not to use the debian guide from ivtvdriver.org (as it
> didn't work) and instead i followed the genereal guide at:
> http://ivtvdriver.org/index.php/Howto.
>
> I'm using driver version 0.4.1 and had no warnings during make
> install, and no conflicting modules found (for tveeprom etc). The
> whole installation seemed to go well everytime i did it, except when
> i cat dmesg and see all the error msgs
>
> when i run:
>
> cat /dev/video0 > test.mpg
>
>
> it just creates an empty file, and nothing more...
>
> Whatever i do it seems to fail with an error -19... I'm not really
> that good in linux, so i might have overlooked something stupid, or
> misread the guide or something like that... Does anyone have any idea
> what is wrong, a pointer in the right direction (or the right
> post/webpage) would be very much appreciated...
>
> Thank you... Kasper Markus
>
> Below are prints from modules.conf, dmesg, lspci and lsmod
>
> /ETC/MODULES.CONF:
> [EMAIL PROTECTED]:~$ cat /etc/modules.conf | grep major-81
> #alias char-major-81 bttv
> alias char-major-81 videodev
> alias char-major-81-0 ivtv
> alias char-major-81-1 ivtv
>
> from DMESG:
> Linux video capture interface: v1.00
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.4.1 (tagged release) loading
> ivtv: Linux version: 2.6.15 gcc-4.0
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 21 (level, low) -> IRQ 20
> ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> i2c_adapter i2c-1: adapter [ivtv i2c driver #0] registered
> i2c-dev: adapter [ivtv i2c driver #0] registered as minor 1
> ivtv0: Failed to load module tveeprom
> ivtv0 warning: i2c client addr: 0x50 not found for command 0x0!
> ivtv0: Error -19 reading Hauppauge eeprom.
> ivtv0: Possible causes: the tveeprom module was not loaded, or
> ivtv0: the eeprom kernel module was loaded before the tveeprom
> module. ivtv0: Failed to load module tuner
> ivtv0: Failed to load module cx25840
> ivtv0 warning: i2c client addr: 0x44 not found for command
> 0xc008561c! ivtv0: Failed to load module wm8775
> ivtv0: Failed to load module tda9887
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers
> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208
> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total)
> ivtv0 warning: i2c client addr: 0x00 not found for command
> 0x40045403! ivtv0 warning: i2c client addr: 0x44 not found for
> command 0x40085618! ivtv0 warning: i2c client addr: 0x44 not found
> for command 0xc0045627! ivtv0 warning: i2c client addr: 0x1b not
> found for command 0x40046d11! ivtv0 warning: i2c client addr: 0x44
> not found for command 0x40046d11! ivtv0 warning: i2c client addr:
> 0x00 not found for command 0x40085618! ivtv0 warning: i2c client
> addr: 0x44 not found for command 0x40085618! ivtv0 warning: i2c
> client addr: 0x44 not found for command 0xc008561c! ivtv0 warning:
> i2c client addr: 0x44 not found for command 0x40045613! ivtv0
> warning: i2c client addr: 0x00 not found for command 0x402c5639!
> ivtv0 warning: i2c client addr: 0x1b not found for command
> 0x402c5639! ivtv0 warning: i2c client addr: 0x44 not found for
> command 0x402c5639! ivtv0 warning: i2c client addr: 0x44 not found
> for command 0x40045612! ivtv0 warning: i2c client addr: 0x44 not
> found for command 0xc008561c! ivtv0: Initialized WinTV PVR 150, card
> #0
> ivtv: ====================== NEXT CARD ======================
> ivtv1: Autodetected WinTV PVR 150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 22 (level, low) -> IRQ 21
> ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
> i2c_adapter i2c-2: adapter [ivtv i2c driver #1] registered
> i2c-dev: adapter [ivtv i2c driver #1] registered as minor 2
> ivtv1: Failed to load module tveeprom
> ivtv1 warning: i2c client addr: 0x50 not found for command 0x0!
> ivtv1: Error -19 reading Hauppauge eeprom.
> ivtv1: Possible causes: the tveeprom module was not loaded, or
> ivtv1: the eeprom kernel module was loaded before the tveeprom
> module. ivtv1: Failed to load module tuner
> ivtv1: Failed to load module cx25840
> ivtv1 warning: i2c client addr: 0x44 not found for command
> 0xc008561c! ivtv1: Failed to load module wm8775
> ivtv1: Failed to load module tda9887
> ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv1: Encoder revision: 0x02050032
> ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers
> (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 80 x 26208
> buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total)
> ivtv1 warning: i2c client addr: 0x00 not found for command
> 0x40045403! ivtv1 warning: i2c client addr: 0x44 not found for
> command 0x40085618! ivtv1 warning: i2c client addr: 0x44 not found
> for command 0xc0045627! ivtv1 warning: i2c client addr: 0x1b not
> found for command 0x40046d11! ivtv1 warning: i2c client addr: 0x44
> not found for command 0x40046d11! ivtv1 warning: i2c client addr:
> 0x00 not found for command 0x40085618! ivtv1 warning: i2c client
> addr: 0x44 not found for command 0x40085618! ivtv1 warning: i2c
> client addr: 0x44 not found for command 0xc008561c! ivtv1 warning:
> i2c client addr: 0x44 not found for command 0x40045613! ivtv1
> warning: i2c client addr: 0x00 not found for command 0x402c5639!
> ivtv1 warning: i2c client addr: 0x1b not found for command
> 0x402c5639! ivtv1 warning: i2c client addr: 0x44 not found for
> command 0x402c5639! ivtv1 warning: i2c client addr: 0x44 not found
> for command 0x40045612! ivtv1 warning: i2c client addr: 0x44 not
> found for command 0xc008561c! ivtv1: Initialized WinTV PVR 150, card
> #1
> ivtv: ==================== END INIT IVTV ====================
>
> from lspci -v:
> 0000:05:08.0 Multimedia video controller: Internext Compression Inc
> iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
> Subsystem: Hauppauge computer works Inc.: Unknown device e807
> Flags: bus master, medium devsel, latency 64, IRQ 20
> Memory at d0000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [44] Power Management version 2
>
> 0000:05:09.0 Multimedia video controller: Internext Compression Inc
> iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
> Subsystem: Hauppauge computer works Inc.: Unknown device e817
> Flags: bus master, medium devsel, latency 64, IRQ 21
> Memory at cc000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [44] Power Management version 2
>
>
> from lsmod -l:
> marklar-box:/home/marklar# lsmod
> Module Size Used by
> ivtv 205652 0
> videodev 9600 1 ivtv
> ipv6 253120 8
> af_packet 14732 2
> nls_iso8859_1 5504 2
> nls_cp437 7168 2
> vfat 12288 2
> fat 47408 1 vfat
> ide_generic 1408 0 [permanent]
> ide_disk 14976 0
> ide_cd 39200 0
> cdrom 36664 1 ide_cd
> snd_intel8x0 31784 0
> snd_ac97_codec 103228 1 snd_intel8x0
> snd_ac97_bus 2560 1 snd_ac97_codec
> joydev 9984 0
> evdev 11136 0
> snd_pcm_oss 52000 0
> snd_mixer_oss 16512 1 snd_pcm_oss
> 8139cp 18432 0
> i2c_ali1535 8324 0
> snd_pcm 84876 3
> snd_intel8x0,snd_ac97_codec,snd_pcm_oss alim15x3 11292
> 0 [permanent]
> generic 5380 0 [permanent]
> parport_pc 34672 0
> parport 36748 1 parport_pc
> floppy 65856 0
> snd_timer 21128 1 snd_pcm
> snd 51968 6
> snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_tim
>er 8139too 25344 0
> mii 5504 2 8139cp,8139too
> i2c_ali1563 8580 0
> i2c_ali15x3 8708 0
> ehci_hcd 30856 0
> ide_core 131544 5
> ide_generic,ide_disk,ide_cd,alim15x3,generic pcspkr
> 2056 0
> ohci_hcd 19076 0
> soundcore 8608 1 snd
> snd_page_alloc 9616 2 snd_intel8x0,snd_pcm
> psmouse 35844 0
> serio_raw 6788 0
> rtc 11640 0
> ext3 118544 0
> jbd 50728 1 ext3
> sd_mod 16408 5
> sata_uli 6020 4
> libata 52248 1 sata_uli
> scsi_mod 135704 2 sd_mod,libata
> unix 25784 64
>
>
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
