Amazing... That worked... thank you so much Hans, you are now officially my hero!
:D yeeehhaaaaa Hans Verkuil wrote: >In drivers/Kbuild remove the 'NO_SUP_MODULES :=' line and compile & >install again. This will be fixed in the upcoming 0.4.2 release. > > Hans > > >On Sunday 15 January 2006 16:55, kasper markus wrote: > > >>Hi everyone, >> >>After purchasing a Hauppauge prv-500 mce-kit a week ago or so, i've >>been fighting to getting it to work on my debian box, I have been >>googling and tried everything i could find that might get it to work, >>but now i give up... I lost the fight and decided to ask for help on >>this list. >> >>As mentioned my card is a pvr-500 mce (kit). I run debian on my >>computer, which is an AMD64 2GHz, with an ASROCK dual-sata2 >>motherboard. I've compiled my own kernel 2.6.15. >> >>I decided not to use the debian guide from ivtvdriver.org (as it >>didn't work) and instead i followed the genereal guide at: >>http://ivtvdriver.org/index.php/Howto. >> >>I'm using driver version 0.4.1 and had no warnings during make >>install, and no conflicting modules found (for tveeprom etc). The >>whole installation seemed to go well everytime i did it, except when >>i cat dmesg and see all the error msgs >> >>when i run: >> >>cat /dev/video0 > test.mpg >> >> >>it just creates an empty file, and nothing more... >> >>Whatever i do it seems to fail with an error -19... I'm not really >>that good in linux, so i might have overlooked something stupid, or >>misread the guide or something like that... Does anyone have any idea >>what is wrong, a pointer in the right direction (or the right >>post/webpage) would be very much appreciated... >> >>Thank you... Kasper Markus >> >>Below are prints from modules.conf, dmesg, lspci and lsmod >> >>/ETC/MODULES.CONF: >>[EMAIL PROTECTED]:~$ cat /etc/modules.conf | grep major-81 >>#alias char-major-81 bttv >>alias char-major-81 videodev >>alias char-major-81-0 ivtv >>alias char-major-81-1 ivtv >> >>from DMESG: >>Linux video capture interface: v1.00 >>ivtv: ==================== START INIT IVTV ==================== >>ivtv: version 0.4.1 (tagged release) loading >>ivtv: Linux version: 2.6.15 gcc-4.0 >>ivtv: In case of problems please include the debug info between >>ivtv: the START INIT IVTV and END INIT IVTV lines, along with >>ivtv: any module options, when mailing the ivtv-users mailinglist. >>ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) >>ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 21 (level, low) -> IRQ 20 >>ivtv0: Unreasonably low latency timer, setting to 64 (was 32) >>i2c_adapter i2c-1: adapter [ivtv i2c driver #0] registered >>i2c-dev: adapter [ivtv i2c driver #0] registered as minor 1 >>ivtv0: Failed to load module tveeprom >>ivtv0 warning: i2c client addr: 0x50 not found for command 0x0! >>ivtv0: Error -19 reading Hauppauge eeprom. >>ivtv0: Possible causes: the tveeprom module was not loaded, or >>ivtv0: the eeprom kernel module was loaded before the tveeprom >>module. ivtv0: Failed to load module tuner >>ivtv0: Failed to load module cx25840 >>ivtv0 warning: i2c client addr: 0x44 not found for command >>0xc008561c! ivtv0: Failed to load module wm8775 >>ivtv0: Failed to load module tda9887 >>ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >>ivtv0: Encoder revision: 0x02050032 >>ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB >>total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers >>(2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 >>buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: >>455 x 4608 buffers (2048KB total) >>ivtv0 warning: i2c client addr: 0x00 not found for command >>0x40045403! ivtv0 warning: i2c client addr: 0x44 not found for >>command 0x40085618! ivtv0 warning: i2c client addr: 0x44 not found >>for command 0xc0045627! ivtv0 warning: i2c client addr: 0x1b not >>found for command 0x40046d11! ivtv0 warning: i2c client addr: 0x44 >>not found for command 0x40046d11! ivtv0 warning: i2c client addr: >>0x00 not found for command 0x40085618! ivtv0 warning: i2c client >>addr: 0x44 not found for command 0x40085618! ivtv0 warning: i2c >>client addr: 0x44 not found for command 0xc008561c! ivtv0 warning: >>i2c client addr: 0x44 not found for command 0x40045613! ivtv0 >>warning: i2c client addr: 0x00 not found for command 0x402c5639! >>ivtv0 warning: i2c client addr: 0x1b not found for command >>0x402c5639! ivtv0 warning: i2c client addr: 0x44 not found for >>command 0x402c5639! ivtv0 warning: i2c client addr: 0x44 not found >>for command 0x40045612! ivtv0 warning: i2c client addr: 0x44 not >>found for command 0xc008561c! ivtv0: Initialized WinTV PVR 150, card >>#0 >>ivtv: ====================== NEXT CARD ====================== >>ivtv1: Autodetected WinTV PVR 150 card (cx23416 based) >>ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 22 (level, low) -> IRQ 21 >>ivtv1: Unreasonably low latency timer, setting to 64 (was 32) >>i2c_adapter i2c-2: adapter [ivtv i2c driver #1] registered >>i2c-dev: adapter [ivtv i2c driver #1] registered as minor 2 >>ivtv1: Failed to load module tveeprom >>ivtv1 warning: i2c client addr: 0x50 not found for command 0x0! >>ivtv1: Error -19 reading Hauppauge eeprom. >>ivtv1: Possible causes: the tveeprom module was not loaded, or >>ivtv1: the eeprom kernel module was loaded before the tveeprom >>module. ivtv1: Failed to load module tuner >>ivtv1: Failed to load module cx25840 >>ivtv1 warning: i2c client addr: 0x44 not found for command >>0xc008561c! ivtv1: Failed to load module wm8775 >>ivtv1: Failed to load module tda9887 >>ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >>ivtv1: Encoder revision: 0x02050032 >>ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB >>total) ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers >>(2048KB total) ivtv1: Allocate DMA encoder VBI stream: 80 x 26208 >>buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: >>455 x 4608 buffers (2048KB total) >>ivtv1 warning: i2c client addr: 0x00 not found for command >>0x40045403! ivtv1 warning: i2c client addr: 0x44 not found for >>command 0x40085618! ivtv1 warning: i2c client addr: 0x44 not found >>for command 0xc0045627! ivtv1 warning: i2c client addr: 0x1b not >>found for command 0x40046d11! ivtv1 warning: i2c client addr: 0x44 >>not found for command 0x40046d11! ivtv1 warning: i2c client addr: >>0x00 not found for command 0x40085618! ivtv1 warning: i2c client >>addr: 0x44 not found for command 0x40085618! ivtv1 warning: i2c >>client addr: 0x44 not found for command 0xc008561c! ivtv1 warning: >>i2c client addr: 0x44 not found for command 0x40045613! ivtv1 >>warning: i2c client addr: 0x00 not found for command 0x402c5639! >>ivtv1 warning: i2c client addr: 0x1b not found for command >>0x402c5639! ivtv1 warning: i2c client addr: 0x44 not found for >>command 0x402c5639! ivtv1 warning: i2c client addr: 0x44 not found >>for command 0x40045612! ivtv1 warning: i2c client addr: 0x44 not >>found for command 0xc008561c! ivtv1: Initialized WinTV PVR 150, card >>#1 >>ivtv: ==================== END INIT IVTV ==================== >> >>from lspci -v: >>0000:05:08.0 Multimedia video controller: Internext Compression Inc >>iTVC16 (CX23416) MPEG-2 Encoder (rev 01) >> Subsystem: Hauppauge computer works Inc.: Unknown device e807 >> Flags: bus master, medium devsel, latency 64, IRQ 20 >> Memory at d0000000 (32-bit, prefetchable) [size=64M] >> Capabilities: [44] Power Management version 2 >> >>0000:05:09.0 Multimedia video controller: Internext Compression Inc >>iTVC16 (CX23416) MPEG-2 Encoder (rev 01) >> Subsystem: Hauppauge computer works Inc.: Unknown device e817 >> Flags: bus master, medium devsel, latency 64, IRQ 21 >> Memory at cc000000 (32-bit, prefetchable) [size=64M] >> Capabilities: [44] Power Management version 2 >> >> >>from lsmod -l: >>marklar-box:/home/marklar# lsmod >>Module Size Used by >>ivtv 205652 0 >>videodev 9600 1 ivtv >>ipv6 253120 8 >>af_packet 14732 2 >>nls_iso8859_1 5504 2 >>nls_cp437 7168 2 >>vfat 12288 2 >>fat 47408 1 vfat >>ide_generic 1408 0 [permanent] >>ide_disk 14976 0 >>ide_cd 39200 0 >>cdrom 36664 1 ide_cd >>snd_intel8x0 31784 0 >>snd_ac97_codec 103228 1 snd_intel8x0 >>snd_ac97_bus 2560 1 snd_ac97_codec >>joydev 9984 0 >>evdev 11136 0 >>snd_pcm_oss 52000 0 >>snd_mixer_oss 16512 1 snd_pcm_oss >>8139cp 18432 0 >>i2c_ali1535 8324 0 >>snd_pcm 84876 3 >>snd_intel8x0,snd_ac97_codec,snd_pcm_oss alim15x3 11292 >>0 [permanent] >>generic 5380 0 [permanent] >>parport_pc 34672 0 >>parport 36748 1 parport_pc >>floppy 65856 0 >>snd_timer 21128 1 snd_pcm >>snd 51968 6 >>snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_tim >>er 8139too 25344 0 >>mii 5504 2 8139cp,8139too >>i2c_ali1563 8580 0 >>i2c_ali15x3 8708 0 >>ehci_hcd 30856 0 >>ide_core 131544 5 >>ide_generic,ide_disk,ide_cd,alim15x3,generic pcspkr >>2056 0 >>ohci_hcd 19076 0 >>soundcore 8608 1 snd >>snd_page_alloc 9616 2 snd_intel8x0,snd_pcm >>psmouse 35844 0 >>serio_raw 6788 0 >>rtc 11640 0 >>ext3 118544 0 >>jbd 50728 1 ext3 >>sd_mod 16408 5 >>sata_uli 6020 4 >>libata 52248 1 sata_uli >>scsi_mod 135704 2 sd_mod,libata >>unix 25784 64 >> >> >> >> >>_______________________________________________ >>ivtv-users mailing list >>[email protected] >>http://ivtvdriver.org/mailman/listinfo/ivtv-users >> >> > >_______________________________________________ >ivtv-users mailing list >[email protected] >http://ivtvdriver.org/mailman/listinfo/ivtv-users > > > > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
