On Sunday 15 January 2006 21:43, Bob Wessen wrote:
> Please excuse this reply to my own message, but I wanted to add that
> the just released 0.4.2 gives the exact same results.
ivtv is not seeing your card at all. Check with lspci to see if the card
is detected properly.
Hans
>
> Bob Wessen wrote:
> > I have used the old ivtv 0.2 branch in the past on a VIA M10000
> > with a PVR350 using gentoo, due to hardware failure it has been
> > out of action for 8 months. I finally ditched the M10000 in favor
> > of a VIA SP13000. Now can't get seem to get ivtv to work again. I
> > have tried both the gentoo 0.4.0 ebuild in the portage tree and
> > when that did not work tried the 0.4.1 release from ivtvdriver.org.
> >
> > I am using Gentoo 2.6.14-r5 sources.
> >
> > lspci gives
> > 00:14.0 Multimedia video controller: Internext Compression Inc
> > iTVC15 MPEG-2 Encoder (rev 01)
> >
> > The strange part is when I try to insert the ivtv module this
> > output comes up in dmesg,
> >
> > ivtv: ==================== START INIT IVTV ====================
> > ivtv: version 0.4.1 (tagged release) loading
> > ivtv: Linux version: 2.6.14-gentoo-r5 preempt VIAC3-2 gcc-3.4
> > ivtv: In case of problems please include the debug info between
> > ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> > ivtv: any module options, when mailing the ivtv-users mailinglist.
> > ivtv: ==================== END INIT IVTV ====================
> >
> > but nothing else. There used to be a whole lot more in the past,
> > and all other posts I have seen have much more going on. After it
> > has been loaded, there are no errors and everything seems fine, but
> > there are no v4l devices setup and nothing works.
> >
> > When I try to load the ivtv-fb module it gives a message
> > ivtv-osd: ivtv_fb_card_id parameter is out of range (valid range:
> > 0--1)
> >
> > at that point the card sometimes hangs, I can't unload the ivtv-fb
> > driver and *sometimes* after this lspci will no longer report the
> > PVR350 as being there.
> >
> > Anyone seen this or have any throughts as to what I can try next?
> > This was all working in the past...
> >
> > _______________________________________________
> > ivtv-users mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
