I'm running kernel 2.6.15.1 and todays ivtv-0.6, and it seems the problem
I have been there already when I installed everything (tested utils a
bit).
When booting up and running
ivtv-tune --freqtable=europe-west --channel=E5
results in "snow", but when running ptune-ui and from the drop down menu
selecting "standard now PAL-BGH, #15" I will get the selected channel and
after that I can use ivtv-tune (or ivtvctl) to switch channels. But no
matter what I do without running ptune-ui once before will result in any
proper output.
The ivtv module don't seem to have PAL-BGH option, I have tried with the
parameter pal=B when loading ivtv, but that don't do any difference.
I would be happy if someone could tell how to use ivtvctl to do the same
thing as ptune-ui does when selecting PAL-BGH, so I can add that to
startup script and make that all my small scripts I use will work without
the need of running ptune-ui.
dmesg:
Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.6.0 (development revision 3142) loading
ivtv: Linux version: 2.6.15-gentoo-r1 K7 gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-250 card (cx23416 based)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKB] -> GSI 10 (level, low)
-> IRQ 10
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom 0-0050: Hauppauge model 32054, rev B148, serial# 7175058
tveeprom 0-0050: tuner model is LG TP18PSB11D (idx 48, type 29)
tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 0-0050: audio processor is MSP4418 (idx 25)
tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
tveeprom 0-0050: has no radio, has IR remote
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
msp3400 0-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect
and autoselect
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
tuner 0-0061: type set to 29 (LG PAL_BG (TPI8PSB11D))
ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
ivtv: ==================== END INIT IVTV ====================
input: i2c IR (Hauppauge) as /class/input/input2
ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-0/0-0018/ir0 [ivtv i2c
driver #0]
--
//Aho
------------------------------------------------------------------------
E-Mail: [EMAIL PROTECTED] URL: http://www.kotiaho.net/~trizt/
ICQ: 13696780
System: Linux System (PPC7447/1000 AMD K7A/2000)
------------------------------------------------------------------------
EU forbids you to send spam without my permission
------------------------------------------------------------------------
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
