I have tried this upgraded twice now with similar results.  I am following the instructions here and have double checked them as I go.
I have a KnoppMyth R5a30.1 system with Single PVR-150 retail onboard.
 
I am a Linux baby here. 
I appreciate any help on this as the Wife is already loves this "PVR thing" if you could only get it to control my Satellite Box.  I had tried a Windoze Platform solution and wasn't impressed(neither was she with that one)
So here I am tyring to get the IR Blaster that came in the box working. 
Why I started trying to upgrade the IVTV the Capture worked fine before but I had to manually change Satellite box channels.
 
At this point I cannot tie the Input device to the Zap2it subscription which seems to be related to the IVTV output below from my syslog.
It mentions here "...any module options..." I am not sure what that means.
 
Appreciate any help here.
 
My Hardware is as follows:
Athlon XP 2200 on Gigabyte GA-7ZMMH board
IDE0 20 Gig PATA-33
IDE1 DVD Burner
IDE2 250 Gig PATA-100
XFX Geforce FX 4000 s-video out.
PVR 150 Retail with IR Blaster and Remote
1 Gig pc133 Ram.
On Board Sound.
Dish Network Sat. s-video out
Microsoft Wireless Keyboard/Mouse
 
Not a barn burner but succesfully transcodes a file, captures at 15000kbs, runs CommFlag and plays back a previous capture at the sametime and doesn't sweat.  Highest CPU I have seen is in the neighborhood of 45%
 
Thanks.
Andy
 
Jan 28 09:33:14 mythtv kernel: ivtv:  ==================== START INIT IVTV ====================
Jan 28 09:33:14 mythtv kernel: ivtv:  version 0.4.2 (tagged release) loading
Jan 28 09:33:14 mythtv kernel: ivtv:  Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3
Jan 28 09:33:14 mythtv kernel: ivtv:  In case of problems please include the debug info between
Jan 28 09:33:14 mythtv kernel: ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
Jan 28 09:33:14 mythtv kernel: ivtv:  any module options, when mailing the ivtv-users mailinglist.
Jan 28 09:33:14 mythtv kernel: ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
Jan 28 09:33:14 mythtv kernel: PCI: Enabling device 0000:00:0f.0 (0000 -> 0002)
Jan 28 09:33:14 mythtv kernel: ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Jan 28 09:33:14 mythtv kernel: tveeprom: ivtv version
Jan 28 09:33:14 mythtv kernel: tveeprom: Hauppauge: model = 26032, rev = C199, serial# = 8296927
Jan 28 09:33:14 mythtv kernel: tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50)
Jan 28 09:33:14 mythtv kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
Jan 28 09:33:14 mythtv kernel: tveeprom: audio processor = CX25841 (type = 23)
Jan 28 09:33:14 mythtv kernel: tveeprom: decoder processor = CX25841 (type = 1c)
Jan 28 09:33:14 mythtv kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
Jan 28 09:33:14 mythtv kernel: tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Jan 28 09:33:14 mythtv kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
Jan 28 09:33:14 mythtv kernel: cx25840 0-0044: ivtv driver
Jan 28 09:33:14 mythtv kernel: cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
Jan 28 09:33:14 mythtv kernel: cx25840 0-0044: unable to open firmware v4l-cx25840.fw
Jan 28 09:33:14 mythtv kernel: ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
Jan 28 09:33:14 mythtv kernel: wm8775 0-001b: ivtv driver
Jan 28 09:33:14 mythtv kernel: wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
Jan 28 09:33:14 mythtv kernel: ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
Jan 28 09:33:14 mythtv kernel: ivtv0: unable to open firmware v4l-cx2341x-enc.fw
Jan 28 09:33:14 mythtv kernel: ivtv0: did you put the firmware in the hotplug firmware directory?
Jan 28 09:33:14 mythtv kernel: ivtv0 warning: failed loading encoder firmware
Jan 28 09:33:14 mythtv kernel: ivtv0 warning: Error loading firmware -3!
Jan 28 09:33:14 mythtv kernel: ivtv0: Error -3 initializing firmware.
Jan 28 09:33:14 mythtv kernel: ivtv0: Error -12 on initialization
Jan 28 09:33:14 mythtv kernel: ivtv: probe of 0000:00:0f.0 failed with error -12
Jan 28 09:33:14 mythtv kernel: ivtv:  ====================  END INIT IVTV  ====================
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to