I've been trying to get my PVR-150 working on my Ubuntu 5.10 install all weekend and now have a problem that I've not found any posts about and hope its a simple thing to correct.
[ 37.662178] Linux video capture interface: v1.00 [ 37.700016] ivtv: ==================== START INIT IVTV ==================== [ 37.700021] ivtv: version 0.4.1 (tagged release) loading [ 37.700024] ivtv: Linux version: 2.6.12-9-amd64-generic gcc-3.4 [ 37.700026] ivtv: In case of problems please include the debug info between [ 37.700029] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 37.700031] ivtv: any module options, when mailing the ivtv-users mailinglist. [ 37.703591] ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) [ 37.705933] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 37.705945] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 37.785816] tveeprom: ivtv version [ 37.785820] tveeprom: Hauppauge: model = 26152, rev = C599, serial# = 8960972 [ 37.785824] tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50) [ 37.785828] tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) [ 37.785832] tveeprom: audio processor = CX25843 (type = 25) [ 37.785835] tveeprom: decoder processor = CX25843 (type = 1e) [ 37.785839] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] [ 37.801069] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 [ 37.801076] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] [ 37.833432] cx25840 0-0044: ivtv driver [ 37.833437] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) [ 37.954435] input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 [ 38.053777] ts: Compaq touchscreen protocol output [ 39.192931] cx25840 0-0044: loaded v4l-cx25840.fw firmware (14264 bytes) [ 39.268796] ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] [ 39.300503] wm8775 0-001b: ivtv driver [ 39.300507] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 39.311244] ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] [ 40.082541] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [ 40.312877] ivtv0 warning: Encoder mailbox not found [ 40.343710] ivtv0 warning: Decoder mailbox not found [ 40.343713] ivtv0: Error locating firmware. [ 40.348913] ivtv0: Error -12 on initialization [ 40.348920] ivtv: probe of 0000:00:08.0 failed with error -12 [ 40.348928] ivtv: ==================== END INIT IVTV ==================== If I'm reading this right then it is finding and loading the firmware but running into some problem after that. Are there any additional logs? Thanks Richard __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
