Hi,
Im using a system with pvr-150 and pvr-350.
Initialization seems fine, ivtv-detect does not show any problem.
But ovr-2nly the pvr-150 input and pvr-350 output is working. There is no
input from pvr-350, i.e.
cat /dev/video0 > /dev/video16 ---> no picture (from pvr-350)
not even static
cat /dev/video1 > /dev/video16 ---> works fine (from pvr-150)
tuner frequency is set identically:
ivtvctl -Rd /dev/video0
ioctl VIDIOC_G_FREQUENCY ok
Frequency = 3028
ivtvctl -Rd /dev/video1
ioctl VIDIOC_G_FREQUENCY ok
Frequency = 3028
I have no idea why this happens.
Any hint ist welcome.
Rainer Kiehne
dmesg seems to be fine:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.3 (tagged release) loading
ivtv: Linux version: 2.6.15.4-rk1-16k preempt PENTIUM4 16KSTACKS gcc-3.3
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0:
Autodetected WinTV PVR 350 card (cx23415 based)
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKG] -> GSI 5 (level, low)
-> IRQ 5
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tveeprom 0-0050: Hauppauge model 48139, rev K257, serial# 7880650
tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38)
tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom
0x74)
tveeprom 0-0050: audio processor is MSP4418 (idx 25)
tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
tveeprom 0-0050: has radio, has IR remote
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
msp3400 0-0040: chip=MSP4418G-B3 +nicam +simple +simpler +radio
mode=simpler msp3400 0-0040: msp34xxg daemon started
ivtv0: i2c attach to card #0 ok [client=MSP4418G-B3, addr=40]
tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB
total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB
total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers
(2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c
driver #0
ivtv0: Initialized WinTV PVR 350, card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected WinTV PVR 150 card (cx23416 based)
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKE] -> GSI 5 (level, low)
-> IRQ 5
ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]
tveeprom 1-0050: Hauppauge model 26054, rev C197, serial# 2878305
tveeprom 1-0050: tuner model is TCL 2002MB_3H (idx 97, type 55)
tveeprom 1-0050: TV standards PAL(B/G) PAL(D/K) (eeprom 0x44)
tveeprom 1-0050: audio processor is CX25843 (idx 37)
tveeprom 1-0050: decoder processor is CX25843 (idx 30)
tveeprom 1-0050: has no radio, has IR remote
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
spurious 8259A interrupt: IRQ7.
cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44]
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b]
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02050032
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
total) ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB
total) ivtv1: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB
total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers
(2048KB total)
tuner: type set to 55 (TCL 2002MB) by ivtv i2c driver #1
ivtv1: Initialized WinTV PVR 150, card #1
ivtv: ==================== END INIT IVTV ====================
ivtv-detect:
driver: ivtv-0.4.3 (tagged release)
card: WinTV PVR 350, bus info 0000:02:0a.0, ivtv card #0
hardware: saa7115 saa7127 msp34xx tda9887 tveeprom
/dev/video0: MPG encoding (links: /dev/video)
/dev/radio0: Radio (links: /dev/radio)
/dev/vbi0: VBI encoding (links: /dev/vbi)
/dev/vbi4: VBI from MPG
/dev/vbi8: VBI decoding
/dev/video16: MPG decoding
/dev/video24: PCM encoding
/dev/video32: YUV encoding
/dev/video48: YUV decoding
driver: ivtv-0.4.3 (tagged release)
card: WinTV PVR 150, bus info 0000:02:0c.0, ivtv card #1
hardware: cx25840 wm8775 tveeprom
/dev/video1: MPG encoding
/dev/vbi1: VBI encoding
/dev/video25: PCM encoding
/dev/video33: YUV encoding
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
