I tried to install ivtv-0.4.3 and ivtv-0.4.1 on 2.6.15-1.1831_FC4, but didn´t succeed. I used the following install and compile instructions http://ivtvdriver.org/index.php/Howto:Fedora.
On version 2.6.14-1.1656_FC4 everything was running fine, but after an update to the new kernel version it stopped working. Working output: Feb 22 20:05:50 localhost kernel: ivtv: ==================== START INIT IVTV ==================== Feb 22 20:05:50 localhost kernel: ivtv: version 0.4.1 (tagged release) loading Feb 22 20:05:50 localhost kernel: ivtv: Linux version: 2.6.14-1.1656_FC4 gcc-4.0 Feb 22 20:05:50 localhost kernel: ivtv: In case of problems please include the debug info between Feb 22 20:05:50 localhost kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with Feb 22 20:05:50 localhost kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. Feb 22 20:05:50 localhost kernel: ivtv0: Autodetected WinTV PVR 350 card (cx23415 based) Feb 22 20:05:50 localhost kernel: ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 58 Feb 22 20:05:50 localhost kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32) Feb 22 20:05:50 localhost kernel: tveeprom: The eeprom says no radio is present, but the tuner type 57 Feb 22 20:05:50 localhost kernel: tveeprom: indicates otherwise. I will assume that radio is present. Feb 22 20:05:50 localhost kernel: tveeprom: ivtv version Feb 22 20:05:51 localhost kernel: tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 2980283 Feb 22 20:05:51 localhost kernel: tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) Feb 22 20:05:51 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Feb 22 20:05:51 localhost kernel: tveeprom: audio processor = MSP4418 (type = 19) Feb 22 20:05:51 localhost kernel: tveeprom: decoder processor = SAA7115 (type = 13) Feb 22 20:05:51 localhost kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] Feb 22 20:05:51 localhost kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] Feb 22 20:05:51 localhost kernel: saa7115 2-0021: ivtv driver Feb 22 20:05:51 localhost kernel: saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) Feb 22 20:05:51 localhost kernel: ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] Feb 22 20:05:51 localhost kernel: saa7127 2-0044: ivtv driver Feb 22 20:05:51 localhost kernel: saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) Feb 22 20:05:51 localhost kernel: ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] Feb 22 20:05:51 localhost kernel: msp3400 2-0040: ivtv driver Feb 22 20:05:52 localhost kernel: msp3400 2-0040: chip=MSP4418G-B3 +nicam +simple +simpler +radio mode=simpler Feb 22 20:05:52 localhost kernel: ivtv0: i2c attach to card #0 ok [client=MSP4418G-B3, addr=40] Feb 22 20:05:52 localhost kernel: msp3400 2-0040: msp34xxg daemon started Feb 22 20:05:52 localhost kernel: tda9887 2-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) Feb 22 20:05:52 localhost kernel: ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] Feb 22 20:05:52 localhost kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) Feb 22 20:05:52 localhost kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) Feb 22 20:05:52 localhost kernel: ivtv0: Encoder revision: 0x02050032 Feb 22 20:05:52 localhost kernel: ivtv0: Decoder revision: 0x02020023 Feb 22 20:05:52 localhost kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) Feb 22 20:05:52 localhost kernel: ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) Feb 22 20:05:52 localhost kernel: ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) Feb 22 20:05:52 localhost kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) Feb 22 20:05:52 localhost kernel: ivtv0: Create encoder radio stream Feb 22 20:05:52 localhost kernel: ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) Feb 22 20:05:53 localhost kernel: ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) Feb 22 20:05:53 localhost kernel: ivtv0: Create decoder VOUT stream Feb 22 20:05:53 localhost kernel: ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total) Feb 22 20:05:53 localhost kernel: ivtv0: loaded v4l-cx2341x-init-mpeg.bin firmware (155648 bytes) Feb 22 20:05:53 localhost kernel: ivtv0: Initialized WinTV PVR 350, card #0 Feb 22 20:05:53 localhost kernel: ivtv: ==================== END INIT IVTV ==================== NOT working output Feb 22 19:39:28 localhost kernel: ivtv: ==================== START INIT IVTV ==================== Feb 22 19:39:28 localhost kernel: ivtv: version 0.4.3 (tagged release) loading Feb 22 19:39:28 localhost kernel: ivtv: Linux version: 2.6.15-1.1831_FC4 SMP gcc-4.0 Feb 22 19:39:28 localhost kernel: ivtv: In case of problems please include the debug info between Feb 22 19:39:28 localhost kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with Feb 22 19:39:28 localhost kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. Feb 22 19:39:28 localhost kernel: ivtv0: Autodetected WinTV PVR 350 card (cx23415 based) Feb 22 19:39:28 localhost kernel: GSI 22 sharing vector 0x4A and IRQ 22 Feb 22 19:39:28 localhost kernel: ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 74 Feb 22 19:39:28 localhost kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32) Feb 22 19:39:28 localhost kernel: tveeprom: The eeprom says no radio is present, but the tuner type 57 Feb 22 19:39:28 localhost kernel: tveeprom: indicates otherwise. I will assume that radio is present. Feb 22 19:39:28 localhost kernel: tveeprom: ivtv version Feb 22 19:39:28 localhost kernel: tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 2980283 Feb 22 19:39:28 localhost kernel: tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) Feb 22 19:39:28 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Feb 22 19:39:28 localhost kernel: tveeprom: audio processor = MSP4418 (type = 19) Feb 22 19:39:28 localhost kernel: tveeprom: decoder processor = SAA7115 (type = 13) Feb 22 19:39:28 localhost kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] Feb 22 19:39:28 localhost kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] Feb 22 19:39:28 localhost kernel: saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) Feb 22 19:39:28 localhost kernel: ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] Feb 22 19:39:28 localhost kernel: saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) Feb 22 19:39:28 localhost kernel: ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] Feb 22 19:39:29 localhost kernel: tda9887 2-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) Feb 22 19:39:29 localhost kernel: ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] Feb 22 19:39:29 localhost kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) Feb 22 19:39:29 localhost kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) Feb 22 19:39:29 localhost kernel: ivtv0: Encoder revision: 0x02050032 Feb 22 19:39:29 localhost kernel: ivtv0: Decoder revision: 0x02020023 Feb 22 19:39:29 localhost kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) Feb 22 19:39:29 localhost kernel: ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) Feb 22 19:39:29 localhost kernel: ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) Feb 22 19:39:29 localhost kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) Feb 22 19:39:29 localhost kernel: ivtv0: Create encoder radio stream Feb 22 19:39:29 localhost kernel: ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) Feb 22 19:39:29 localhost kernel: ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) Feb 22 19:39:29 localhost kernel: ivtv0: Create decoder VOUT stream Feb 22 19:39:29 localhost kernel: ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total) Feb 22 19:39:29 localhost kernel: ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40086d11! Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40085618! Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x402c5639! Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! Feb 22 19:39:29 localhost kernel: ivtv0: Initialized WinTV PVR 350, card #0 Feb 22 19:39:29 localhost kernel: ivtv: ==================== END INIT IVTV ==================== Any clue how to fix? _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
