I just tried installing KnoppMyth R5 Beta 7 and I'm getting error message from the IVTV module. I had the same problems with KnoppMyth A30.2. I'm banging my head against the wall and about to give up. Could someone please help me out? I'm a newbie and don't know what to try.
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.3 (tagged release) loading ivtv: Linux version: 2.6.15-chw-2 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) ACPI: PCI Interrupt 0000:00:08.0[Q]: no GSI ivtv0: Unreasonably low latency timer, setting to 64 (was 48) ivtv0 warning: i2c client addr: 0x50 not found for command 0x0! ivtv0: Error -19 reading Hauppauge eeprom. ivtv0: Possible causes: the tveeprom module was not loaded, or ivtv0: the eeprom kernel module was loaded before the tveeprom module. ivtv0 warning: i2c client addr: 0x44 not found for command 0xc008561c! ivtv0: Could not detect tuner standard, defaulting to NTSC. ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0 warning: Encoder mailbox not found ivtv0 warning: Decoder mailbox not found ivtv0: Error locating firmware. ivtv0: Error -12 on initialization ivtv: probe of 0000:00:08.0 failed with error -12 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
