On Sunday 16 April 2006 18:54, Petter Gundersen wrote:
> On 4/16/06, Monte Carlo <[EMAIL PROTECTED]> wrote:
> > Hello list,
> >
> > I feel like an idiot!
> >
> > I am new to Linux in general, and Fedora 5 in particular.
> >
> > I would like to be able to watch TV on this machine, and ultimately
> > record TV programs for later viewing. I dual boot this with W2K,
> > and have been using an All in Wonder Radeon 9600 for TV purposes
> > over in Windows.
> >
> > But, as I have found out, ATI TV capture is a bit of a problem in
> > Fedora. So I did some reading and found that WinTV products look
> > like they will work. So I got this WinTV PVR 150, and haven't had
> > much luck getting it going. I can't see any TV in TV Time, or in
> > Xine. And there's this error in the dmesg output about 'Tuner type
> > not set'
> >
> > I've read around and can't seem to find the answer I need. Can
> > anyone help me to get this thing working? Pleeeease!!
> >
> > As suggested for posting here's the output from dmesg, lspci, and
> > ivtvctl:
> >
> > ivtv: ==================== START INIT IVTV ====================
> > ivtv: version 0.6.1 (development snapshot compiled on Wed Mar 29
> > 17:11:32 2006) loading
> > ivtv: Linux version: 2.6.16-1.2080_FC5 686 REGPARM 4KSTACKS
> > gcc-4.1 ivtv: In case of problems please include the debug info
> > between ivtv: the START INIT IVTV and END INIT IVTV lines, along
> > with ivtv: any module options, when mailing the ivtv-users
> > mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card
> > (cx23416 based) ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKG]
> > -> GSI 11 (level, low) -> IRQ 11
> > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> > cx25840 1-0044: loaded v4l-cx25840.fw firmware (13353 bytes)
> > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
> > tveeprom 1-0050: Hauppauge model 26582, rev F0B2, serial# 9446989
> > tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 4)
> > tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
> > tveeprom 1-0050: audio processor is CX25843 (idx 37)
> > tveeprom 1-0050: decoder processor is CX25843 (idx 30)
> > tveeprom 1-0050: has no radio, has no IR remote
> > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > ivtv0: Encoder revision: 0x02040024
> > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers
> > (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800
> > buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120
> > x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM
> > audio stream: 455 x 4608 buffers (2048KB total)
> > tuner 1-0061: tuner type not set
> > tuner 1-0061: tuner type not set
> > ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
> > ivtv: ==================== END INIT IVTV ====================
> > [EMAIL PROTECTED] ~]#
>
> Looking through the tveeprom source I see this:
> { TUNER_ABSENT, "TCL M2523_5N_E"},
> This means your tuner actually isn't supported yet. It might be a
> good idea to try the ivtv-devel mailing list. Hopefully support for
> this particular tuner can be added.
I've added support to ivtv-0.4 in subversion (using tuner 50). For
ivtv-0.6 this will only work if you patch tveeprom.c from the kernel to
use TUNER_TCL_2002N instead of TUNER_ABSENT for this tuner.
I'll also see that it is added to the v4l sources.
Hans
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
