Hello, I upgraded to 0.4.4.
If i change input video standard to SECAM i don't get anything good. It looks like frequency is not right. If source is set to PAL i get the picture but with snow, as the frequency wasn't right. But with 0.3.9 driver it was clear picture on PAL but with red color in it, in SECAM i didn't even get picture! Gregor Fuis wrote: > Hello, > > I can't get serial numbers because i am not in the same place now. But i > think that it writes on a tuner PAL/Secam. So it would have to work! > Maybe i just have to change some settingsto the card? > > Best Regards, > Gregor Fuis > > > Richard Hendershot wrote: > >> The current utility from ivtv 0.6 allows setting hue and saturation >> (ivtvctl -Y reads the values) but there's no RGB that I can find. >> >> http://en.wikipedia.org/wiki/SECAM >> "SÉCAM differs from the other color systems by the way the R-Y and B-Y >> signals are carried. >> First, SÉCAM uses frequency modulation >> <http://en.wikipedia.org/wiki/Frequency_modulation> to encode >> chrominance <http://en.wikipedia.org/wiki/Chrominance> information on >> the sub carrier. >> Second, instead of transmitting the red and blue information together, >> it only sends one of them at a time, and uses the information about >> the other color from the preceding line...." >> >> You may be able to use ivtvctl to approximate B/W. Otherwise you may >> be able to use a converter >> (http://www.vtx.co.uk/video/tvconverters.htm#tsp100) >> <http://www.vtx.co.uk/video/tvconverters.htm#tsp100%29> >> >> I'd upgrade, were I you, in any case. btw- I'm american and use NTSC >> so have no real knowledge of SECAM. But I have internet, and a little >> research was interesting.... so.... YMMV ;) >> >> Which model? There is a SECAM version of the 150 >> >> *Model numbers* >> *model 01045:* WinTV-PVR-150 with Hauppauge remote control, IR Blaster >> and NTSC tuner >> *model 01046:* WinTV-PVR-150 with Hauppauge remote control, IR Blaster >> and PAL/SECAM tuner >> >> >> On Mon, 2006-04-17 at 16:26 +0200, Gregor Fuis wrote: >> >>> Hello, >>> >>> When i was in Gemany i bought PVR-150 card and it worked very well. It >>> is instaled on ubuntu distribution with 2.6.12 kernel and ivtv 3.9.0 >>> drivers. Now i am in russia and can't get to internet very easy. >>> >>> Here in russia they have secam standard and now all my channels are in >>> red color. Does somebody know if more recent version of ivtv could solve >>> the problem. I didn't set anything diferent than in europe for PAL so >>> maybe i am doing something wrong. >>> >>> I am looking picture with vlc media player. >>> >>> Please i just need info if somebody know how could i solve the problem >>> with this red color all over my channels! >>> >>> Thanks >>> >>> Best Regards, >>> Gregor Fuis >>> >>> _______________________________________________ >>> ivtv-users mailing list >>> [email protected] <mailto:[email protected]> >>> http://ivtvdriver.org/mailman/listinfo/ivtv-users >>> >>> >> -- >> Richard Hendershot <[EMAIL PROTECTED] >> <mailto:[EMAIL PROTECTED]>> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> ivtv-users mailing list >> [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-users >> > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
