Thanks for the help interpreting my dmesg output. I tried the card under windows and consistently got a blue screen on windows startup when the driver was installed. I'm sending the card back and hopefully will have better luck with its replacement.
Thanks! -Ed On 4/29/06, Hans Verkuil <[EMAIL PROTECTED]> wrote: > I recommend that you test your card in a Windows PC. It can't find the > cx2584x chip, which generally indicates that your card is broken. > > Hans > > On Saturday 29 April 2006 08:40, Edward Barnard wrote: > > Hi > > > > I have a Hauppauge PVR-150 (model 1062) running under Ubuntu Breezy > > (5.10) (i386 NOT amd64 version) with ubuntu's kernel 2.6.12-10-386 on > > a MSI K8T Neo (Via K8T800 chipset) motherboard. > > > > I have tried ivtv version 0.4.0, 0.4.4, and the latest svn tarball > > from the 0.4 branch, but keep getting the same i2c errors like this > > in dmesg: > > > > ivtv0 warning: i2c client addr: 0x44 not found for command > > 0xc008561c! > > > > ivtv correctly identifies the card and creates /dev/video0 etc, > > however when I try to read the mpeg stream with "cat /dev/video0" i > > get no mpeg stream and this in dmesg: > > > > [4297655.072000] ivtv0 warning: i2c client addr: 0x44 not found for > > command 0xc0cc5605! > > [4297655.552000] ivtv0 warning: i2c client addr: 0x44 not found for > > command 0x40045613! > > [4297655.552000] ivtv0 warning: i2c client addr: 0x44 not found for > > command 0x40045612! > > > > When I tried 0.4.4 | got this as part of my dmesg: > > [4294707.422000] tveeprom: tuner = <unknown> (idx = 112, type = 4) > > > > but in the latest 0.4 svn: > > [4295967.902000] tveeprom: tuner = TCL M2523_5N_E (idx = 112, type = > > 50) > > > > This is the "lspci -v" output: > > 0000:00:08.0 Multimedia video controller: Internext Compression Inc > > iTVC16 (CX23416) MPEG-2 Encoder (rev 01) > > Subsystem: Hauppauge computer works Inc.: Unknown device > > 8801 Flags: bus master, medium devsel, latency 64, IRQ 19 Memory at > > c8000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power > > Management version 2 > > > > Here is the full dmesg output: > > > > [4295967.858000] ivtv: ==================== START INIT IVTV > > ==================== > > [4295967.858000] ivtv: version 0.4.5 (development snapshot compiled > > on Fri 28 Apr 2006 10:30:01 PM PDT) loading > > [4295967.858000] ivtv: Linux version: 2.6.12-10-386 386 gcc-3.4 > > [4295967.858000] ivtv: In case of problems please include the debug > > info between > > [4295967.858000] ivtv: the START INIT IVTV and END INIT IVTV lines, > > along with > > [4295967.859000] ivtv: any module options, when mailing the ivtv- > > users mailinglist. > > [4295967.861000] ivtv0: Autodetected WinTV PVR 150 card (cx23416 > > based) [4295967.862000] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 > > (level, low) -> IRQ 19 > > [4295967.902000] tveeprom: ivtv version > > [4295967.902000] tveeprom: Hauppauge: model = 26582, rev = F0B2, > > serial# = 9448199 > > [4295967.902000] tveeprom: tuner = TCL M2523_5N_E (idx = 112, type = > > 50) [4295967.902000] tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, > > v4l2 = 0x00001000) > > [4295967.902000] tveeprom: audio processor = CX25843 (type = 25) > > [4295967.902000] tveeprom: decoder processor = CX25843 (type = 1e) > > [4295967.902000] ivtv0: i2c attach to card #0 ok [client=tveeprom, > > addr=50] > > [4295967.918000] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv > > i2c driver #0 > > [4295967.918000] ivtv0: i2c attach to card #0 ok [client=(tuner > > unset), addr=61] > > [4295968.074000] wm8775 0-001b: ivtv driver > > [4295968.074000] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver > > #0) [4295968.081000] ivtv0: i2c attach to card #0 ok [client=wm8775, > > addr=1b] > > [4295968.127000] ivtv0 warning: i2c client addr: 0x44 not found for > > command 0xc008561c! > > [4295968.809000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 > > bytes) > > [4295969.029000] ivtv0: Encoder revision: 0x02050032 > > [4295969.030000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 > > buffers (4096KB total) > > [4295969.032000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 > > buffers (2048KB total) > > [4295969.034000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 > > buffers (2048KB total) > > [4295969.035000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x > > 4608 buffers (2048KB total) > > [4295969.036000] tuner: type set to 50 (TCL 2002N) by ivtv i2c driver > > #0 [4295969.036000] ivtv0 warning: i2c client addr: 0x44 not found > > for command 0x40085618! > > [4295969.036000] ivtv0 warning: i2c client addr: 0x44 not found for > > command 0xc0045627! > > [4295969.039000] ivtv0 warning: i2c client addr: 0x44 not found for > > command 0x40046d11! > > [4295969.039000] ivtv0 warning: i2c client addr: 0x44 not found for > > command 0x40085618! > > [4295969.039000] ivtv0 warning: i2c client addr: 0x44 not found for > > command 0xc008561c! > > [4295969.039000] ivtv0 warning: i2c client addr: 0x44 not found for > > command 0x40045613! > > [4295969.042000] ivtv0 warning: i2c client addr: 0x44 not found for > > command 0x402c5639! > > [4295969.042000] ivtv0 warning: i2c client addr: 0x44 not found for > > command 0x40045612! > > [4295969.142000] ivtv0 warning: i2c client addr: 0x44 not found for > > command 0xc008561c! > > [4295969.142000] ivtv0: Initialized WinTV PVR 150, card #0 > > [4295969.142000] ivtv: ==================== END INIT IVTV > > ==================== > > > > > > Thanks for your help! > > -Ed > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
