Hi all,

I've been successfully running ivtv 0.4.2 under Linux 2.6.14 (gentoo-r5) 
for quite some time now.  I thought I'd try out kernel 2.6.16 with 
0.6.2.  It is rather a mixed blessing.  The first tuner doesn't seem to 
work but the second tuner works just fine.

I thought I'd try to diagnose things myself, but didn't get anywhere.  
Attached is the dmesg output when I loaded with tuner debug=1.  Any 
suggestions would be appreciated.

Thanks

Kevin

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.6.2 (tagged release) loading
ivtv:  Linux version: 2.6.16-gentoo-r7 PENTIUM4 4KSTACKS gcc-3.4
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner 1-0060: TEA5767 detected.
tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio)
tuner 1-0060: ivtv i2c driver #0 tuner I2C addr 0xc0 with type 62 used 
for 0x02
tuner 1-0061: Setting mode_mask to 0x0c
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tuner 1-0061: tuner 0x61: Tuner type absent
tveeprom 1-0050: Hauppauge model 23552, rev D492, serial# 7893483
tveeprom 1-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 
101, type 62)
tveeprom 1-0050: audio processor is CX25843 (idx 37)
tveeprom 1-0050: decoder processor is CX25843 (idx 30)
tveeprom 1-0050: has radio, has no IR remote
ivtv0: This is the first unit of a PVR500
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB 
total)
ivtv0: Create encoder radio stream
tuner 1-0060: Calling set_type_addr for type=57, addr=0xff, mode=0x04
tuner 1-0061: Calling set_type_addr for type=57, addr=0xff, mode=0x04
tuner 1-0061: type set to 57 (Philips FQ1236A MK4)
tuner 1-0061: ivtv i2c driver #0 tuner I2C addr 0xc2 with type 57 used 
for 0x0c
tuner 1-0061: Cmd VIDIOC_S_STD accepted for analog TV
tuner 1-0061: switching to v4l2
tuner 1-0061: tv freq set to 400.00
tuner 1-0061: tv: range 1
tuner 1-0061: Freq= 400.00 MHz, V_IF=45.75 MHz, Offset=0.00 MHz, div=7132
tuner 1-0061: tv 0x1b 0xdc 0x8e 0x02
tuner 1-0060: switching to v4l2
tuner 1-0060: Cmd VIDIOC_S_FREQUENCY accepted for radio
tuner 1-0060: radio freq set to 0.06
tuner 1-0060: radio freq (0.06) out of range (65-108)
tuner 1-0060: TEA5767 radio freq = 65.000 MHz
tuner 1-0060: TEA5767 set to stereo
tuner 1-0060: TEA5767 radio HIGH LO inject xtal @ 32,768 MHz
TEA5767 Ready Flag OFF
TEA5767 Tuner not at band limit
TEA5767 Frequency 57268.398 KHz (divider = 0x1b6b)
TEA5767 Mono
TEA5767 IF Counter = 0
TEA5767 ADC Level = 0
TEA5767 Chip ID = 0
TEA5767 Reserved = 0x00
ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
ivtv:  ======================  NEXT CARD  ======================
ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #1)
cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
tuner 2-0061: Setting mode_mask to 0x0e
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
tuner 2-0061: tuner 0x61: Tuner type absent
tveeprom 2-0050: Hauppauge model 23552, rev D492, serial# 7893483
tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 
101, type 62)
tveeprom 2-0050: audio processor is CX25843 (idx 37)
tveeprom 2-0050: decoder processor is CX25843 (idx 30)
tveeprom 2-0050: has radio, has no IR remote
ivtv1: This is the second unit of a PVR500
ivtv1: Correcting tveeprom data: no radio present on second unit
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02050032
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB 
total)
tuner 2-0061: Calling set_type_addr for type=57, addr=0xff, mode=0x04
tuner 2-0061: type set to 57 (Philips FQ1236A MK4)
tuner 2-0061: ivtv i2c driver #1 tuner I2C addr 0xc2 with type 57 used 
for 0x0e
tuner 2-0061: Cmd VIDIOC_S_STD accepted for analog TV
tuner 2-0061: switching to v4l2
tuner 2-0061: tv freq set to 400.00
tuner 2-0061: tv: range 1
tuner 2-0061: Freq= 400.00 MHz, V_IF=45.75 MHz, Offset=0.00 MHz, div=7132
tuner 2-0061: tv 0x1b 0xdc 0x8e 0x02
tuner 2-0061: tv freq set to 67.25
tuner 2-0061: tv: range 0
tuner 2-0061: Freq= 67.25 MHz, V_IF=45.75 MHz, Offset=0.00 MHz, div=1808
tuner 2-0061: tv 0x07 0x10 0x8e 0x01
ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
ivtv:  ====================  END INIT IVTV  ====================
tuner 1-0060: Cmd VIDIOC_G_FREQUENCY accepted for radio



_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to