Michael, Thank you for responding. > Put the firmware files in /lib/firmware/`uname -r`/ > This worked for me. I have put the firmware files in the following directories: /lib/firmware/2.6.15-22-686/v4l-cx2341x-dec.fw /usr/lib/hotplug/firmware/v4l-cx2341x-dec.fw /lib/firmware/2.6.15-22-686/v4l-cx2341x-enc.fw /usr/lib/hotplug/firmware/v4l-cx2341x-enc.fw /usr/local/lib/hotplug/firmware/v4l-cx2341x-enc.fw /lib/firmware/2.6.15-22-686/v4l-cx25840.fw /usr/lib/hotplug/firmware/v4l-cx25840.fw
I then re-ran the following: depmod modprobe ivtv dmesg There doesn't seem to be any change except that the IVTV section does not show up near the end of the dmesg output as it is suggested it should, so I don't know if the situation has worsened. Also, when turning on Tvtime, it says: No signal No such file or directory Cannot open capture device /dev/video0 Although the Tvtime errors are probably to be expected since the dmesg output has not yet been successful. Do I have the right firmware files in the right place, and am I loading them correctly? -- Dave M G _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
