Hello All ,
After upgrading my SuSE 10.0 system (AMD64 X86-64 kernel 2.6.13 , using the
0.4.4 ivtv dirver) i get following IRQ errors when loading the ivtv module. I
tried the 0.7.0 development version of SuSE and latest 0.6.2 version
Both gave the same problem :-(
vtv: ==================== START INIT IVTV ====================
ivtv: version 0.6.2 (tagged release) loading
ivtv: Linux version: 2.6.16.13-4-default gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
PCI: No IRQ known for interrupt pin D of device 0000:06:08.0. Probably buggy
MP table.
tuner 5-0060: TEA5767 detected.
tuner 5-0060: chip found @ 0xc0 (ivtv i2c driver #0)
tuner 5-0060: type set to 62 (Philips TEA5767HN FM Radio)
tuner 5-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tda9887 5-0043: chip found @ 0x86 (ivtv i2c driver #0)
cx25840 5-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 5-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
wm8775 5-001b: chip found @ 0x36 (ivtv i2c driver #0)
tveeprom 5-0050: Hauppauge model 23559, rev E491, serial# 9354353
tveeprom 5-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
tveeprom 5-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom
0x74)
tveeprom 5-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101,
type 62)
tveeprom 5-0050: audio processor is CX25843 (idx 37)
tveeprom 5-0050: decoder processor is CX25843 (idx 30)
tveeprom 5-0050: has radio, has no IR remote
ivtv0: This is the first unit of a PVR500
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
ivtv0: Create encoder radio stream
setup_irq: irq handler mismatch
Call Trace: <ffffffff8014559e>{setup_irq+236}
<ffffffff888fe5ac>{:ivtv:ivtv_irq_handler+0}
<ffffffff80145638>{request_irq+133}
<ffffffff888f604d>{:ivtv:ivtv_probe+5719}
<ffffffff801d4d19>{pci_device_probe+76}
<ffffffff802317b4>{driver_probe_device+82}
<ffffffff8023190b>{__driver_attach+140}
<ffffffff8023187f>{__driver_attach+0}
<ffffffff802311c2>{bus_for_each_dev+67}
<ffffffff80230e32>{bus_add_driver+126}
<ffffffff801d4eb4>{__pci_register_driver+110}
<ffffffff888f478b>{:ivtv:module_start+234}
<ffffffff8013c31e>{sys_init_module+4853}
<ffffffff8010a3b6>{system_call+126}
ivtv0: Failed to register irq -16
ivtv0: Error -16 on initialization
ivtv: probe of 0000:06:08.0 failed with error -16
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
PCI: No IRQ known for interrupt pin A of device 0000:06:09.0. Probably buggy
MP table.
tuner 5-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tda9887 5-0043: chip found @ 0x86 (ivtv i2c driver #0)
cx25840 5-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 5-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
wm8775 5-001b: chip found @ 0x36 (ivtv i2c driver #0)
tveeprom 5-0050: Hauppauge model 23559, rev E491, serial# 9354353
tveeprom 5-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
tveeprom 5-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom
0x74)
tveeprom 5-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101,
type 62)
tveeprom 5-0050: audio processor is CX25843 (idx 37)
tveeprom 5-0050: decoder processor is CX25843 (idx 30)
tveeprom 5-0050: has radio, has no IR remote
ivtv0: This is the second unit of a PVR500
ivtv0: Correcting tveeprom data: no radio present on second unit
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
setup_irq: irq handler mismatch
Call Trace: <ffffffff8014559e>{setup_irq+236}
<ffffffff888fe5ac>{:ivtv:ivtv_irq_handler+0}
<ffffffff80145638>{request_irq+133}
<ffffffff888f604d>{:ivtv:ivtv_probe+5719}
<ffffffff801d4d19>{pci_device_probe+76}
<ffffffff802317b4>{driver_probe_device+82}
<ffffffff8023190b>{__driver_attach+140}
<ffffffff8023187f>{__driver_attach+0}
<ffffffff802311c2>{bus_for_each_dev+67}
<ffffffff80230e32>{bus_add_driver+126}
<ffffffff801d4eb4>{__pci_register_driver+110}
<ffffffff888f478b>{:ivtv:module_start+234}
<ffffffff8013c31e>{sys_init_module+4853}
<ffffffff8010a3b6>{system_call+126}
ivtv0: Failed to register irq -16
ivtv0: Error -16 on initialization
ivtv: probe of 0000:06:09.0 failed with error -16
ivtv: ==================== END INIT IVTV ====================
System workt perfectly when running the "old" 2.6.13 kernel under SuSE 10.0
(using mythtv)
luc
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
