Hello all ,
found a solution for the problem. It seems that setting the BIOS setting
Plug&Play OS to NO fixed the problem :-)
i have a ASUS A8N5X motherboard
lspci showed that now IRQ was assigned to the card . After changing the bios
setting all worked well again and with the 0.7.0 modules from suse.
luc
On Tuesday 16 May 2006 19:44, Luc Willems wrote:
> Hello All ,
>
> After upgrading my SuSE 10.0 system (AMD64 X86-64 kernel 2.6.13 , using the
> 0.4.4 ivtv dirver) i get following IRQ errors when loading the ivtv module.
> I tried the 0.7.0 development version of SuSE and latest 0.6.2 version Both
> gave the same problem :-(
>
> vtv: ==================== START INIT IVTV ====================
> ivtv: version 0.6.2 (tagged release) loading
> ivtv: Linux version: 2.6.16.13-4-default gcc-4.1
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> PCI: No IRQ known for interrupt pin D of device 0000:06:08.0. Probably
> buggy MP table.
> tuner 5-0060: TEA5767 detected.
> tuner 5-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> tuner 5-0060: type set to 62 (Philips TEA5767HN FM Radio)
> tuner 5-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> tda9887 5-0043: chip found @ 0x86 (ivtv i2c driver #0)
> cx25840 5-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 5-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
> wm8775 5-001b: chip found @ 0x36 (ivtv i2c driver #0)
> tveeprom 5-0050: Hauppauge model 23559, rev E491, serial# 9354353
> tveeprom 5-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
> tveeprom 5-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
> (eeprom 0x74)
> tveeprom 5-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101,
> type 62)
> tveeprom 5-0050: audio processor is CX25843 (idx 37)
> tveeprom 5-0050: decoder processor is CX25843 (idx 30)
> tveeprom 5-0050: has radio, has no IR remote
> ivtv0: This is the first unit of a PVR500
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
> ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
> ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
> ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
> total)
> ivtv0: Create encoder radio stream
> setup_irq: irq handler mismatch
>
> Call Trace: <ffffffff8014559e>{setup_irq+236}
> <ffffffff888fe5ac>{:ivtv:ivtv_irq_handler+0}
> <ffffffff80145638>{request_irq+133}
> <ffffffff888f604d>{:ivtv:ivtv_probe+5719}
> <ffffffff801d4d19>{pci_device_probe+76}
> <ffffffff802317b4>{driver_probe_device+82}
> <ffffffff8023190b>{__driver_attach+140}
> <ffffffff8023187f>{__driver_attach+0}
> <ffffffff802311c2>{bus_for_each_dev+67}
> <ffffffff80230e32>{bus_add_driver+126}
> <ffffffff801d4eb4>{__pci_register_driver+110}
> <ffffffff888f478b>{:ivtv:module_start+234}
> <ffffffff8013c31e>{sys_init_module+4853}
> <ffffffff8010a3b6>{system_call+126}
> ivtv0: Failed to register irq -16
> ivtv0: Error -16 on initialization
> ivtv: probe of 0000:06:08.0 failed with error -16
> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> PCI: No IRQ known for interrupt pin A of device 0000:06:09.0. Probably
> buggy MP table.
> tuner 5-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> tda9887 5-0043: chip found @ 0x86 (ivtv i2c driver #0)
> cx25840 5-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 5-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
> wm8775 5-001b: chip found @ 0x36 (ivtv i2c driver #0)
> tveeprom 5-0050: Hauppauge model 23559, rev E491, serial# 9354353
> tveeprom 5-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
> tveeprom 5-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
> (eeprom 0x74)
> tveeprom 5-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101,
> type 62)
> tveeprom 5-0050: audio processor is CX25843 (idx 37)
> tveeprom 5-0050: decoder processor is CX25843 (idx 30)
> tveeprom 5-0050: has radio, has no IR remote
> ivtv0: This is the second unit of a PVR500
> ivtv0: Correcting tveeprom data: no radio present on second unit
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
> ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
> ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
> ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
> total)
> setup_irq: irq handler mismatch
>
> Call Trace: <ffffffff8014559e>{setup_irq+236}
> <ffffffff888fe5ac>{:ivtv:ivtv_irq_handler+0}
> <ffffffff80145638>{request_irq+133}
> <ffffffff888f604d>{:ivtv:ivtv_probe+5719}
> <ffffffff801d4d19>{pci_device_probe+76}
> <ffffffff802317b4>{driver_probe_device+82}
> <ffffffff8023190b>{__driver_attach+140}
> <ffffffff8023187f>{__driver_attach+0}
> <ffffffff802311c2>{bus_for_each_dev+67}
> <ffffffff80230e32>{bus_add_driver+126}
> <ffffffff801d4eb4>{__pci_register_driver+110}
> <ffffffff888f478b>{:ivtv:module_start+234}
> <ffffffff8013c31e>{sys_init_module+4853}
> <ffffffff8010a3b6>{system_call+126}
> ivtv0: Failed to register irq -16
> ivtv0: Error -16 on initialization
> ivtv: probe of 0000:06:09.0 failed with error -16
> ivtv: ==================== END INIT IVTV ====================
>
>
> System workt perfectly when running the "old" 2.6.13 kernel under SuSE 10.0
> (using mythtv)
>
>
> luc
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
