I upgraded to 0.6.2 and my PVR350 and PVR500 worked. After playing around on Windows (wintv2000) and after a very long cold-boot the second tuner of the PVR500 only gives static: Reverting to 0.4.2 and every thing is working.
Is there an issue with 0.6.2 initializing or changing channels ? Strange is that the detected fromat is NTSC-M (instead of PAL) it was always correctly identified (card #2). Is this line of special concern, because the 'specified standard' is PAL ? Also strange is that it reports Composite 7: how is it possible that card #1 (first tuner of PVR500) with the same setting reported works. I checked the version of ivtvctl: /usr/bin/ivtvctl --version ivtvctl version 0.6.2 (development snapshot compiled on Mon May 8 07:38:57 2006) There are no settings during startup. ivtv2: ================= START STATUS CARD #2 ================= tveeprom 2-0050: Hauppauge model 23559, rev D591, serial# 8201932 tveeprom 2-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR remote tuner 2-0061: Tuner mode: radio tuner 2-0061: Frequency: 0.54 MHz tuner 2-0061: Standard: 0x000000ff tuner 2-0061: Signal strength: 32768 tuner 2-0061: Stereo: yes tda9887 2-0043: Data bytes: b=0x94 c=0x74 e=0x49 cx25840 2-0044: Video signal: not present cx25840 2-0044: Detected format: NTSC-M cx25840 2-0044: Detected audio mode: forced mode cx25840 2-0044: Detected audio standard: no detected audio standard cx25840 2-0044: Audio muted: yes cx25840 2-0044: Audio microcontroller: running cx25840 2-0044: Configured audio standard: automatic detection cx25840 2-0044: Configured audio system: automatic standard and mode detection cx25840 2-0044: Specified standard: PAL-BDGHI cx25840 2-0044: Specified video input: Composite 7 cx25840 2-0044: Specified audio input: Tuner (In8) cx25840 2-0044: Specified audioclock freq: 48000 Hz cx25840 2-0044: Preferred audio mode: stereo cx25840 2-0044: Selected 65 MHz format: autodetect cx25840 2-0044: Selected 45 MHz format: chroma wm8775 2-001b: Input: 2 ivtv2: ================== END STATUS CARD #2 ================== ivtv1: ================= START STATUS CARD #1 ================= tveeprom 1-0050: Hauppauge model 23559, rev D591, serial# 8201932 tveeprom 1-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR remote tuner 1-0060: Tuner mode: undefined tuner 1-0060: Frequency: 0.00 MHz tuner 1-0060: Standard: 0x00000000 tuner 1-0061: Tuner mode: analog TV tuner 1-0061: Frequency: 471.18 MHz tuner 1-0061: Standard: 0x000000ff tda9887 1-0043: Data bytes: b=0x94 c=0x74 e=0x49 cx25840 1-0044: Video signal: present cx25840 1-0044: Detected format: PAL-BDGHI cx25840 1-0044: Detected audio mode: stereo cx25840 1-0044: Detected audio standard: A2-BG cx25840 1-0044: Audio muted: no cx25840 1-0044: Audio microcontroller: running cx25840 1-0044: Configured audio standard: automatic detection cx25840 1-0044: Configured audio system: automatic standard and mode detection cx25840 1-0044: Specified standard: PAL-BDGHI cx25840 1-0044: Specified video input: Composite 7 cx25840 1-0044: Specified audio input: Tuner (In8) cx25840 1-0044: Specified audioclock freq: 48000 Hz cx25840 1-0044: Preferred audio mode: stereo cx25840 1-0044: Selected 65 MHz format: autodetect cx25840 1-0044: Selected 45 MHz format: chroma wm8775 1-001b: Input: 2 ivtv1: ================== END STATUS CARD #1 ================== ivtv0: ================= START STATUS CARD #0 ================= tveeprom 0-0050: Hauppauge model 48139, rev K257, serial# 7805538 tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 0-0050: audio processor is MSP4418 (idx 25) tveeprom 0-0050: decoder processor is SAA7115 (idx 19) tveeprom 0-0050: has radio, has IR remote tuner 0-0061: Tuner mode: analog TV tuner 0-0061: Frequency: 471.18 MHz tuner 0-0061: Standard: 0x000000ff tda9887 0-0043: Data bytes: b=0x14 c=0x74 e=0x49 saa7115 0-0021: Audio frequency: 48000 Hz saa7115 0-0021: Input: Composite 4 saa7115 0-0021: Video signal: broadcast/DVD saa7115 0-0021: Frequency: 50 Hz saa7115 0-0021: Detected format: PAL saa7127 0-0044: Standard: 50 Hz saa7127 0-0044: Input: normal saa7127 0-0044: Output: S-Video + Composite saa7127 0-0044: WSS: invalid saa7127 0-0044: VPS: disabled saa7127 0-0044: CC: disabled msp3400 0-0040: MSP4418G-B3 rev1 = 0x0217 rev2 = 0x1243 msp3400 0-0040: Audio: volume 60260 msp3400 0-0040: Mode: AM (for carrier detect) msp3400 0-0040: Standard: 5.5/5.74 B/G Dual FM-Stereo (stereo) msp3400 0-0040: ACB: 0x0c00 ivtv0: ================== END STATUS CARD #0 ================== ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.2 (development snapshot compiled on Mon May 8 07:44:41 2006) loading ivtv: Linux version: 2.6.16-1.2108_FC4 686 REGPARM 4KSTACKS gcc-4.0 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 193 tveeprom 0-0050: Hauppauge model 48139, rev K257, serial# 7805538 tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 0-0050: audio processor is MSP4418 (idx 25) tveeprom 0-0050: decoder processor is SAA7115 (idx 19) tveeprom 0-0050: has radio, has IR remote tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0) saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) msp3400 0-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) msp3400 0-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[EMAIL PROTECTED]> and others ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02040024 ivtv0: Decoder revision: 0x02020023 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv0: Create decoder VOUT stream ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 21 (level, low) -> IRQ 201 tuner 1-0060: TEA5767 detected. tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #1) tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #1) tveeprom 1-0050: Hauppauge model 23559, rev D591, serial# 8201932 tveeprom 1-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR remote ivtv1: This is the first unit of a PVR500 cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 1-0044: loaded v4l-cx25840.fw firmware (13353 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02040024 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv1: Create encoder radio stream tuner 1-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) ivtv1: Initialized WinTV PVR 500 (unit #1), card #1 ivtv: ====================== NEXT CARD ====================== ivtv2: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 22 (level, low) -> IRQ 209 tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #2) tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #2) cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2) cx25840 2-0044: loaded v4l-cx25840.fw firmware (13353 bytes) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #2) tveeprom 2-0050: Hauppauge model 23559, rev D591, serial# 8201932 tveeprom 2-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR remote ivtv2: This is the second unit of a PVR500 ivtv2: Correcting tveeprom data: no radio present on second unit ivtv2: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv2: Encoder revision: 0x02040024 ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv2: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv2: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 2-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) ivtv2: Initialized WinTV PVR 500 (unit #2), card #2 ivtv: ==================== END INIT IVTV ==================== ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0) ivtv0-osd: screen coords: [0 0] -> [720 576] ivtv0-osd: original global alpha = 208 ivtv0-osd: current OSD state = 39 ivtv0-osd: new global alpha = 208 (1 255 0) ivtv0-osd: framebuffer at 0xed510000, mapped to 0xe1010000, size 1665k ivtv0-osd: mode is 720x576x32, linelength=2880 ivtv0-osd warning: ivtvfb_set_par Console: switching to colour frame buffer device 90x36 ivtv0-osd: fb0: cx23415 TV out frame buffer device ivtv0: Allocate DMA decoder OSD stream: 16 x 65536 buffers (1024KB total) _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
