scott miller wrote:
Hello,
I'm having a problem getting my Hauppague PVR-250 card to work.
Admittedly I haven't used the card for a very long time, and it sat in a
box for about a year, but it still seems to be recognized fine by the
system.
lspci -v output:
05:06.0 Multimedia video controller: Internext Compression Inc iTVC15
MPEG-2 Eoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-250
Flags: bus master, medium devsel, latency 64, IRQ 58
Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Anyway I am running Gentoo on an AMD64 processor with a 2.6.12 kernel.
Here is the dmesg output from a modprobe ivtv.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.2 (tagged release) loading
ivtv: Linux version: 2.6.12-gentoo-r6 SMP gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 250 card (cx23415 based)
ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level,
low) -> IRQ 58
tveeprom: ivtv version
tveeprom: Hauppauge: model = 48011, rev = G510, serial# = 2670671
tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type = 2)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = MSP3435 (type = a)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
saa7115 0-0021: ivtv driver
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
msp3400 0-0040: ivtv driver
msp3400 0-0040: chip=MSP3435G-B6 +nicam +simple +simpler +radio mode=simpler
ivtv0: i2c attach to card #0 ok [client=MSP3435G-B6, addr=40]
msp3400 0-0040: msp34xxg daemon started
ivtv0: unable to open firmware
ivtv0 warning: failed loading encoder firmware
ivtv0 warning: Error loading firmware -3!
ivtv0: Error -3 initializing firmware.
ivtv0: Error -12 on initialization
ivtv: probe of 0000:05:06.0 failed with error -12
ivtv: ==================== END INIT IVTV ====================
The confusing bit to me is the "unable to open firmware" bit. Doing a
search for similar problems most people seem to actually have the name
of the firmware file that ivtv is unable to load...
Any help would be greatly appreciated!
Scott
------------------------------------------------------------------------
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
Please check out the firmware page here:
http://www.ivtvdriver.org/index.php/Firmware, and try all the steps.
--
Mark Paulus
2424 Garden of the Gods Rd | Phone: v622-5578 / 719-535-5578
0419/117 - LEC Access ; D5-1010 | FAX: 719-535-1665
Colo Springs, CO 80919 | 1800PageMCI / 1406052
AIM : mgpaulus1 / sametime : mark.paulus
begin:vcard
fn:Mark Paulus
n:Paulus;Mark
org:MCI;Lec Interfaces / 40419
adr;dom:;;2424 Garden of the Gods Rd;Colorado Springs;CO;80919
email;internet:[EMAIL PROTECTED]
title:Mark Paulus
tel;work:719-535-5578
tel;pager:800-pagemci / 1406052
tel;home:v622-5578
version:2.1
end:vcard
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
