I also verified the md5sums for the files.
Thanks,
Scott
On 5/23/06, Mark Paulus <[EMAIL PROTECTED]> wrote:
scott miller wrote:
> Hello,
>
> I'm having a problem getting my Hauppague PVR-250 card to work.
> Admittedly I haven't used the card for a very long time, and it sat in a
> box for about a year, but it still seems to be recognized fine by the
> system.
>
> lspci -v output:
>
> 05:06.0 Multimedia video controller: Internext Compression Inc iTVC15
> MPEG-2 Eoder (rev 01)
> Subsystem: Hauppauge computer works Inc. WinTV PVR-250
> Flags: bus master, medium devsel, latency 64, IRQ 58
> Memory at d0000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [44] Power Management version 2
>
>
> Anyway I am running Gentoo on an AMD64 processor with a 2.6.12 kernel.
>
> Here is the dmesg output from a modprobe ivtv.
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.4.2 (tagged release) loading
> ivtv: Linux version: 2.6.12-gentoo-r6 SMP gcc-3.4
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected WinTV PVR 250 card (cx23415 based)
> ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level,
> low) -> IRQ 58
> tveeprom: ivtv version
> tveeprom: Hauppauge: model = 48011, rev = G510, serial# = 2670671
> tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type = 2)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio processor = MSP3435 (type = a)
> tveeprom: decoder processor = SAA7115 (type = 13)
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> saa7115 0-0021: ivtv driver
> saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
> msp3400 0-0040: ivtv driver
> msp3400 0-0040: chip=MSP3435G-B6 +nicam +simple +simpler +radio mode=simpler
> ivtv0: i2c attach to card #0 ok [client=MSP3435G-B6, addr=40]
> msp3400 0-0040: msp34xxg daemon started
> ivtv0: unable to open firmware
> ivtv0 warning: failed loading encoder firmware
> ivtv0 warning: Error loading firmware -3!
> ivtv0: Error -3 initializing firmware.
> ivtv0: Error -12 on initialization
> ivtv: probe of 0000:05:06.0 failed with error -12
> ivtv: ==================== END INIT IVTV ====================
>
> The confusing bit to me is the "unable to open firmware" bit. Doing a
> search for similar problems most people seem to actually have the name
> of the firmware file that ivtv is unable to load...
>
> Any help would be greatly appreciated!
>
> Scott
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
Please check out the firmware page here:
http://www.ivtvdriver.org/index.php/Firmware, and try all the steps.
--
Mark Paulus
2424 Garden of the Gods Rd | Phone: v622-5578 / 719-535-5578
0419/117 - LEC Access ; D5-1010 | FAX: 719-535-1665
Colo Springs, CO 80919 | 1800PageMCI / 1406052
AIM : mgpaulus1 / sametime : mark.paulus
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
