Hi, I'm running ivtv-0.6.2 on kernel 2.6.16.14 (gentoo-2.6.16-r7) and I'm experiencing several issues such as the firmware sometimes fails to load. But most annoying is the colors on playback: The red color seems to be way to weak (or maybe totally absent?). This happens both in passthrough mode, and cat foo.mpg > /dev/video16.
Below is the ivtv messages from the syslog and the output of ivtvctl --log-status Any hints on how to solve or troubleshoot this is much appreciated. -- hw May 24 09:47:37 empia ivtv: ==================== START INIT IVTV ==================== May 24 09:47:37 empia ivtv: version 0.6.2 (tagged release) loading May 24 09:47:37 empia ivtv: Linux version: 2.6.16-gentoo-r7 preempt VIAC3-2 REGPARM 4KSTACKS gcc-4.1 May 24 09:47:37 empia ivtv: In case of problems please include the debug info between May 24 09:47:37 empia ivtv: the START INIT IVTV and END INIT IVTV lines, along with May 24 09:47:37 empia ivtv: any module options, when mailing the ivtv-users mailinglist. May 24 09:47:37 empia ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) May 24 09:47:37 empia ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 May 24 09:47:37 empia ivtv0: Unreasonably low latency timer, setting to 64 (was 32) May 24 09:47:37 empia tveeprom 0-0050: Hauppauge model 48139, rev K257, serial# 8378906 May 24 09:47:37 empia tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) May 24 09:47:37 empia tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) May 24 09:47:37 empia tveeprom 0-0050: audio processor is MSP4418 (idx 25) May 24 09:47:37 empia tveeprom 0-0050: decoder processor is SAA7115 (idx 19) May 24 09:47:37 empia tveeprom 0-0050: has radio, has IR remote May 24 09:47:37 empia tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) May 24 09:47:37 empia tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0) May 24 09:47:37 empia saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) May 24 09:47:37 empia saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) May 24 09:47:37 empia msp3400 0-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) May 24 09:47:37 empia msp3400 0-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect May 24 09:47:37 empia ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) May 24 09:47:37 empia ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) May 24 09:47:37 empia ivtv0: Encoder revision: 0x02050032 May 24 09:47:37 empia ivtv0: Decoder revision: 0x02020023 May 24 09:47:37 empia ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) May 24 09:47:37 empia ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) May 24 09:47:37 empia ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) May 24 09:47:37 empia ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) May 24 09:47:37 empia ivtv0: Create encoder radio stream May 24 09:47:37 empia ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) May 24 09:47:37 empia ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) May 24 09:47:37 empia ivtv0: Create decoder VOUT stream May 24 09:47:37 empia ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total) May 24 09:47:37 empia ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) May 24 09:47:37 empia tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) May 24 09:47:37 empia ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 May 24 09:47:37 empia ivtv: ==================== END INIT IVTV ==================== empia ~ # ivtvctl --log-status ioctl VIDIOC_LOG_STATUS ok ivtv0: ================= START STATUS CARD #0 ================= tveeprom 0-0050: Hauppauge model 48139, rev K257, serial# 8378906 tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 0-0050: audio processor is MSP4418 (idx 25) tveeprom 0-0050: decoder processor is SAA7115 (idx 19) tveeprom 0-0050: has radio, has IR remote tuner 0-0061: Tuner mode: analog TV tuner 0-0061: Frequency: 161.25 MHz tuner 0-0061: Standard: 0x000000ff tda9887 0-0043: Data bytes: b=0x14 c=0x74 e=0x49 saa7115 0-0021: Audio frequency: 48000 Hz saa7115 0-0021: Input: Composite 4 saa7115 0-0021: Video signal: broadcast/DVD saa7115 0-0021: Frequency: 50 Hz saa7115 0-0021: Detected format: PAL saa7127 0-0044: Standard: 50 Hz saa7127 0-0044: Input: normal saa7127 0-0044: Output: S-Video saa7127 0-0044: WSS: invalid saa7127 0-0044: VPS: disabled saa7127 0-0044: CC: disabled msp3400 0-0040: MSP4418G-B3 rev1 = 0x0217 rev2 = 0x1243 msp3400 0-0040: Audio: volume 58880 msp3400 0-0040: Mode: AM (for carrier detect) msp3400 0-0040: Standard: 5.5/5.74 B/G Dual FM-Stereo (mono) msp3400 0-0040: ACB: 0x0c00 ivtv0: ================== END STATUS CARD #0 ================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
