Hi, I have a PVR 150 card and always get error "ivtv0 warning: 1000 ms time out waiting for firmware", my system is a shuttle st62k with celeron 2.8ghz and 1gb ram, I have tried the following combinations of kernel and ivtv versions:
2.6.16-gentoo-r6 +ivtv 0.6.2 2.6.16-gentoo-r7 +ivtv 0.6.2 2.6.15-gentoo-r1 + ivtv 0.4.0 (gentoo portage) 2.6.15-gentoo-r1 + ivtv 0.4.2 (gentoo portage) 2.6.15-gentoo-r1 + ivtv 0.4.5 2.6.15-gentoo-r1 + ivtv svn tarball I've tried different firmware vesions but that doesnt make any difference.. Here is the full ivtv dmesg using 0.4.5: vtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.5 (tagged release) loading ivtv: Linux version: 2.6.15-gentoo-r1 PENTIUM4 gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 tveeprom: ivtv version tveeprom: Hauppauge: model = 26039, rev = C155, serial# = 7860791 tveeprom: tuner = Philips FQ1216ME MK3 (idx = 55, type = 38) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25842 (type = 24) tveeprom: decoder processor = CX25842 (type = 1d) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840 0-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) cx25840 0-0044: loaded v4l-cx25840.fw firmware (14264 bytes) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0 warning: 1000 ms time out waiting for firmware ivtv0 warning: Failed api call 0x00000080 with result 0xfffffff0 ivtv0 warning: Encoder firmware dead! ivtv0: Error initializing firmware ivtv0: Error 0 on initialization ivtv: ==================== END INIT IVTV ==================== Anybody have any suggestions? Thanks Andy _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
