> 1) The cx28540 module is loaded (lsmod output included) > 2) The firmware is loaded (ivtv dmesg output included) > 3) There are no conflicting modules (only one ivtv, tveeprom, cx285340 > exists under /lib/modules/`uname -r`) > 4) The card is known good and properly seated > 5) The tuner type appears to be set correctly > 6) I have no lines in modprobe.conf that are relevant to any of the > ivtv-related modules (included) > > But I am getting the dreaded "i2c hardware 0x00000001 not found for > command" error, and of course nothing works. If I try to use this > capture card via "cat /dev/video0" (so that I can rule out any MythTV > configuration issues), I just get an empty file. Here are the logs, if > anybody can help me I would really appreciate it. BTW, a PVR-500 card > temporarily placed into the same computer did work, but the PVR-150 will > not.
It's nice to hear I'm not alone in this problem!! I've been trying compiling other kernels, including vanilla 2.6.16.16 and 2.6.16.17, and I keep getting the same result. When the new kernel's built, and I 'make install' the ivtv-0.6.2 drivers, the card works fine. As soon as the system is rebooted, it fails again. Interesting that the PVR-500 worked! I'd been using a DVB-T card, but have now only got the PVR-150 installed. Can anyone help? Should I compile a kernel with i2c debugging and post some output? I really don't know anything about i2c! _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
