Hans, My previous version was 0.4.4.
I do have multiple verisons of tveeprom.ko and msp3400.ko I had renamed my tveeprom in order for an HD-3000 to co-exist. This was working with 0.4.4 and Myth 0.19. Which directory should msp3400.ko reside /lib/modules/2.6.12-10-686/kernel/drivers/media/video or /lib/modules/2.6.12-10-686/kernel/ivtv ? If I want to roll back to 0.4.4, what is the proper way to uninstall? Thanks. --Joel Message: 6 Date: Thu, 1 Jun 2006 08:05:45 +0200 From: Hans Verkuil <[EMAIL PROTECTED]> Subject: Re: [ivtv-users] No Sound PVR250 after 0.4.5 Upgrade To: User discussion about IVTV <[email protected]> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="iso-8859-1" What was your previous working ivtv version? Hans On Thursday 01 June 2006 05:02, Joel Turner wrote: >> I upgraded to 0.4.5 the other day and no longer get sound on any >> recordings. Dmesg output is as follows: >> >> ivtv: ==================== START INIT IVTV ==================== >> [4294687.696000] ivtv: version 0.4.5 (tagged release) loading >> [4294687.696000] ivtv: Linux version: 2.6.12-10-686 686 gcc-3.4 >> [4294687.696000] ivtv: In case of problems please include the debug >> info between >> [4294687.696000] ivtv: the START INIT IVTV and END INIT IVTV lines, >> along with >> [4294687.696000] ivtv: any module options, when mailing the ivtv- >> users mailinglist. >> [4294687.706000] ivtv0: Autodetected WinTV PVR 250 card (cx23416 >> based) [4294687.716000] ivtv0: Unreasonably low latency timer, >> setting to 64 (was 32) >> [4294687.717000] ivtv0: i2c attach to card #0 ok [client=tveeprom, >> addr=50] >> [4294687.843000] ivtv0: i2c attach to card #0 ok [client=(tuner >> unset), addr=61] >> [4294687.844000] tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #0) >> [4294688.040000] saa7115 4-0021: ivtv driver >> [4294688.040000] saa7115 4-0021: saa7115 found @ 0x42 (ivtv i2c >> driver #0) >> [4294688.143000] ivtv0: i2c attach to card #0 ok [client=saa7115, >> addr=21] >> [4294688.197000] ivtv0: i2c attach to card #0 ok [client=MSP3445G-B8, >> addr=40] >> [4294689.007000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 >> bytes) >> [4294689.227000] ivtv0: Encoder revision: 0x02050032 >> [4294689.227000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 >> buffers (4096KB total) >> [4294689.228000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 >> buffers (2048KB total) >> [4294689.229000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 >> buffers (2048KB total) >> [4294689.229000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x >> 4608 buffers (2048KB total) >> [4294689.230000] ivtv0: Create encoder radio stream >> [4294689.427000] ivtv0: Initialized WinTV PVR 250, card #0 >> [4294689.427000] ivtv: ==================== END INIT IVTV >> ==================== >> [4294689.857000] ivtv0: i2c attach to card #0 ok [client=Hauppauge >> IR, addr=18] >> >> I've tried to recompile the driver, ran depmod and rebooted with the >> same issues. I'm kind of stumped at this point. Any idea on where to >> look next? >> >> Thanks. >> >> --Joel > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
