Ok I renamed msp3400,ko ( I has already renamed tveeprom.ko) Dmesg output is now as follows:
[4294690.312000] ivtv: ==================== START INIT IVTV ==================== [4294690.312000] ivtv: version 0.4.5 (tagged release) loading [4294690.312000] ivtv: Linux version: 2.6.12-10-686 686 gcc-3.4 [4294690.312000] ivtv: In case of problems please include the debug info between [4294690.312000] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [4294690.312000] ivtv: any module options, when mailing the ivtv- users mailinglist. [4294690.323000] ivtv0: Autodetected WinTV PVR 250 card (cx23416 based) [4294690.332000] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] - > GSI 18 (level, low) -> IRQ 18 [4294690.332000] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [4294690.333000] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] [4294690.387000] tveeprom: Hauppauge: model = 32062, rev = C199, serial# = 8557556 [4294690.387000] tveeprom: tuner = <unknown> (idx = 99, type = 0) [4294690.387000] tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) [4294690.387000] tveeprom: audio_processor = MSP3445 (type = 12) [4294690.411000] tuner 3-0061: chip found @ 0xc2 (cx88[0]) [4294690.411000] tuner 3-0061: type set to 52 (Thomson DDT 7610 (ATSC/ NTSC)) [4294690.459000] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] [4294690.460000] tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #0) [4294690.658000] saa7115 4-0021: ivtv driver [4294690.658000] saa7115 4-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) [4294690.761000] ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] [4294690.786000] msp34xx: init: chip=MSP3445G-B8 +nicam +simple +simpler +radio mode=simpler [4294690.790000] ivtv0: i2c attach to card #0 ok [client=MSP3445G-B8, addr=40] [4294690.790000] msp34xxg: daemon started [4294690.840000] tda9885/6/7: chip found @ 0x86 [4294691.638000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [4294691.858000] ivtv0: Encoder revision: 0x02050032 [4294691.858000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) [4294691.859000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) [4294691.860000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) [4294691.860000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) [4294691.861000] ivtv0: Create encoder radio stream [4294691.861000] tuner 4-0061: type set to 50 (TCL 2002N) [4294692.052000] ivtv0: Initialized WinTV PVR 250, card #0 [4294692.052000] ivtv: ==================== END INIT IVTV ==================== Looks like the audio decoder now loads but I'm still not getting sound. I'm stumped at this point. On Jun 1, 2006, at 11:43 AM, <[EMAIL PROTECTED]> <[EMAIL PROTECTED] .com> wrote: >> Hans, >> >> My previous version was 0.4.4. >> >> I do have multiple verisons of tveeprom.ko and msp3400.ko I had >> renamed my >> tveeprom in order for an HD-3000 to co-exist. This was working >> with 0.4.4 and Myth >> 0.19. Which directory should msp3400.ko reside >> /lib/modules/2.6.12-10-686/kernel/drivers/media/video or >> /lib/modules/2.6.12-10-686/kernel/ivtv ? If I want to roll back >> to 0.4.4, what is >> the proper way to uninstall? >> >> Thanks. >> >> --Joel > Delete the tveeprom.ko and msp3400.ko from /lib/modules/ > 2.6.12-10-686/kernel/ivtv > these kernel versions are not compatible with ivtv. > > John > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
