Is there anyone out there who actually has a PVR-150 working on FC5? I am still trying to solve the following problem on an FC5 box with a PVR-150 and kernel 2.6.16-1.2122_FC5:
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 [...] full log at http://www.gossamer-threads.com/lists/ivtv/users/30080 ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c addr 0x44 not found for command 0x40045613! ivtv0: i2c addr 0x44 not found for command 0xc0045627! ivtv0: i2c addr 0x44 not found for command 0x40345622! ivtv0: i2c addr 0x44 not found for command 0x40045612! I have tried the 0.6.2 drivers that come with ATrpms. I have tried compiling and installing 0.6.2 and 0.6.1 from source (compiles and installs, but same problem). I have tried to compile 0.6.0 but it dies with a compile error. I even tried 0.4.5, which dies with a warning that 2.6.16 kernels are not supported (I knew that would happen, but I'm grasping at straws). A PVR-500 temporarily placed into the same machine worked fine (with 0.6.2 ATrpms). The IR part of the card works with LIRC. The same card worked in this machine prior to upgrading from FC3 to FC5. Is there anyone out there who actually has a PVR-150 working on FC5? I just want to make sure that I am not trying to do the impossible here. --Greg _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
